PVI5080NPbF, PVI5080NSPbF Photovoltaic Isolator Single Channel 5-10 Volt Output General Description Features The PVI Series Photovoltaic Isolator generates an Isolated Voltage Source electrically isolated DC voltage upon receipt of a Monolithic Construction DC input signal. It is capable of directly driving Up to 8 A Output gates of power MOSFETs or IGBTs. It utilizes a Single Output monolithic integrated circuit photovoltaic generator Solid-State Reliability of novel construction as its output. The output is controlled by radiation from a GaAlAs light emitting diode (LED), which is optically isolated from the photovoltaic generator. The PVI Series is ideally suited for applications requiring high-current and/or high-voltage switching with optical isolation between the low-level driving circuitry and high-energy or high-voltage load circuits. It can be used for directly driving gates of power MOSFETs. The dual-channel device allows its outputs to drive independent discrete power MOSFETs, or be connected in parallel or in series to provide higher current drive for power MOSFETs or higher voltage drive for IGBTs. The PVI Series Photovoltaic isolators employ fast turn-off circuitry. These PVI Series Photovoltaic Isolators are packaged in 8-pin, molded DIP packages and available with either thru-hole or surface-mount (gull-wing) leads, in plastic shipping tubes. Part Identification Applications PVI5080NPbF thru-hole Load Distribution Industrial Controls PVI5080NSPbF Surface-mount Current-to-Voltage Conversion (gull-wing) Custom Solid-State Relay 1 2017-12-05 PVI5080NPbF/PVI5080NSPbF Electrical Specifications (-40C T +85C unless otherwise specified) A INPUT CHARACTERISTICS Limits Units Input Current Range (see figure 4) 2.0 to 50 mA (DC) Maximum Forward Voltage Drop 10mA, 25C (see figure 5) 1.4 V (DC) Maximum Reverse Voltage 6.0 V (DC) Maximum Reverse Current -6.0V (DC), 25C 100 A (DC) Maximum Pulsed Input Current 25C (see figure 6) 1.0 A (peak) OUTPUT CHARACTERISTICS Limits Units Maximum Forward Voltage 10A 8.0 per channel V (DC) Maximum Reverse Current -10V 10 A DC (DC) COUPLED CHARACTERISTICS Limits Units Minimum Open Circuit Voltage ILED = 10mA, 25C, RL = >10M 5.0 V (DC) (see figures 1 to 2) Minimum Short Circuit Current ILED = 14mA, 25C (see figures 1 to 2) 8.0 A (DC) Maximum Capacitance (Input/Output) 1.0 pF Maximum Ton Time ILED=10mA, CLOAD=10pF (See Figure7) 300 S RL > 20M 160 S RL=10M RL=4.7M 90 S Maximum Toff Time ILED=10mA, CLOAD=10pF (See Figure7) 220 S GENERAL CHARACTERISTICS Limits Units Minimum Dielectric Strength, Input-Output 4000 V RMS Minimum Dielectric Strength, Output-to-Output 1200 V DC Minimum Insulation Resistance, Input-to-Output, 12 10 T =+25C, 50%RH, 100V A DC Maximum Pin Soldering Temperature (10 seconds maximum) +260 Ambient Temperature Range: Operating -40 to 85 C Storage -40 to 125 Infineon Technology does not recommend the use of this product in aerospace, avionics, military or life support applications. Users of this Infineon Technology product in such applications assume all risks of such use and indemnify Infineon Technology against all damages resulting from such use. 2 2017-12-05