Series PVT212PbF Microelectronic Power IC HEXFET Power MOSFET Photovoltaic Relay Single-Pole, Normally-Open, 0-150V, 550mA AC / 825mA DC General Description Features The PVT212 Series Photovoltaic Relay is a single- HEXFET Power MOSFET output pole, normally open solid-state relay that can replace Bounce-free operation electromechanical relays in many applications. It 4,000 V I/O isolation RMS utilizes International Rectifiers proprietary HEXFET Very low on-resistance (R ) power MOSFET as the output switch, driven by an DD-ON Linear AC/DC operation integrated circuit photovoltaic generator of novel construction. The output switch is controlled by Solid-State Reliability radiation from a GaAlAs light emitting diode (LED) UL recognized which is optically isolated from the photovoltaic ESD Tolerance: generator. 4000V Human Body Model These SSRs are specifically designed for industrial 500V Machine Model control and peripheral telecom applications. Series PVT212 Relays are packaged in a 6-lead molded DIP package with either thru-hole or surface mount (gull-wing) terminals. It is available in standard plastic shipping tubes or on tape-and-reel. Please refer to part identification information Applications Control of AC (up to 90 VAC) industrial loads Control of DC industrial loads up to +/-120 VDC Telecom line switching Part Identification PVT212PbF thru-hole PVT212SPbF surface-mount PVT212S-TPbF surface-mount, Tape and Reel (HEXFET is the registered trademark for International Rectifier Power MOSFETs) 1 www.irf.com 2015 International Rectifier Submit Datasheet Feedback May 18, 2015Series PVT212PbF Electrical Specifications (T +25C unless otherwise specified) A = INPUT CHARACTERISTICS Limits Units Minimum Control Current (see figure 1) 5.0 mA Maximum Control Current for Off-State Resistance 0.4 mA Control Current Range (Caution: current limit input LED, see figure 5) 5.0 to 25 mA Maximum Reverse Voltage 6.0 V OUTPUT CHARACTERISTICS Limits Units Operating Voltage Range 0 to 150 V peak 5mA Control (see figure 1) Maximum Load Current T =+40C A A Connection 550 mA B Connection 600 mA C Connection 825 mA Maximum On-State Resistance TA=+25C 100mA Pulsed Load, 5mA Control (see figures 2 & 3) A Connection 0.75 B Connection 0.40 C Connection 0.25 Max. pulsed Load Current TA=+25C, 10mA Control (10mS 10% duty cycle) 1200 mA A Maximum Off-State Leakage T =+25C, 150V 1.0 A Maximum Turn-On Time TA=+25C (see figures 6 & 7) For 50mA, 100 V load, 10mA Control (5mS pulse width 50% duty cycle) 3.0 ms DC Maximum Turn-Off Time T =+25C (see figures 6 & 7) A For 50mA, 100 V load, 10mA Control (5mS pulse width 50% duty cycle) 0.5 ms DC Maximum Output Capacitance 50V , f=1MHz (Cout, see figure 8) 100 pF DC GENERAL CHARACTERISTICS Limits Units Minimum Dielectric Strength, Input-Output 4000 V RMS 12 Minimum Insulation Resistance, Input-Output 10 Maximum Capacitance, Input-Output Vd=0V, f=1MHz 1.0 pF Maximum Pin Soldering Temperature (10 seconds maximum) +260 Ambient Temperature Range: Operating -40 to +85 C Storage -40 to +100 International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications. Users of this International Rectifier product in such applications assume all risks of such use and indemnify International Rectifier against all damages resulting from such use. Connection Diagrams 2 www.irf.com 2015 International Rectifier Submit Datasheet Feedback May 18, 2015