% & ( ) )*+,* General Description The PVX6012 Photovoltaic Relay is a single-pole, IGBT and HEXFRED output normally open solid-state relay that can replace 600 Vp blocking voltage electromechanical relays in many applications. It 1 A / 1 A DC load current RMS utilizes an IGBT output switch, driven by an integrated 3,750 V I/O isolation RMS circuit photovoltaic generator of novel construction. Solid-state reliability The output switch is controlled by radiation from a High input sensitivity GaAlAs light emitting diode (LED) which is optically isolated from the photovoltaic generator. Low off-state leakage current The PVX6012 is ideally suited for switching medium Bounce-free and arc-free operation power loads. It offers high operating speed, low and No EMI generation stable on-state voltage drop as well as low off-state UL508 recognized leakage current. PVX6012 relays are packaged in a 14-pin, molded DIP package in thru-hole. It is available in standard plastic shipping tubes. Applications Industrial controls and automation Test equipment Instrumentation Motor control Robotics Electromechanical Relay replacement Part Identification Mercury-wetted Relay replacement PVX6012PbF thru-hole (HEXFET is the registered trademark for International Rectifiers power MOSFETs) 1 www.infineon.com/ssr June 05, 2019 Electrical Specifications (-40C T +85C unless otherwise specified) A INPUT CHARACTERISTICS Limits Units Minimum Control Current (see figure 1) 5.0 mA Maximum Control Current for Off-State Leakage TA =+25C 0.4 mA Control Current Range (Caution: current limit input LED, see figure 6) 5.0 to 25 mA Maximum Reverse Voltage 6.0 V OUTPUT CHARACTERISTICS Limits Units Transient Overvoltage Protection 600 V (DC or AC peak) Operating Voltage 0-280 V(AC) RMS 0-400 V(DC) Maximum Load Current T = +40C 1.0 A(DC) A 5mA Control (see figure 1 and Note 1) 1.0 A (AC) RMS Maximum Surge Current A(DC) non-repetitive, 1 sec. 5 non-repetitive 20 msec. (see figure 2) 20 A(DC) Maximum On-State Voltage Drop T =+25C 2.5 V A For 1A pulsed load, 5mA Control (see figures 3 and 4) Maximum Off-State Leakage TA =+25C, 400V (see figure 5) 10 A Maximum Turn-On Time TA =+25C (see figure 8) 7 ms For 1A, 400 V load, 5mA Control DC Maximum Turn-Off Time TA =+25C (see figure 8) 1 ms For 1A, 400 V load, 5mA Control DC Maximum Output Capacitance 100V (see figure 7) 50 pF DC Notes: Load handling capability to 0.2 power factor requires overvoltage tection. GENERAL CHARACTERISTICS Limits Units Minimum Dielectric Strength, Input-Output 3750 V RMS 12 Minimum Insulation Resistance, Input-Output 10 TA =+25C, 50%RH, 100V DC Maximum Capacitance, Input-Output 1.0 pF Maximum Pin Soldering Temperature (10 seconds maximum) +260 Ambient Temperature Range: Operating -40 to +85 C Storage -40 to +100 Connection Diagram % & 2 www.infineon.com/ssr June 05, 2019