Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as Cypress document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio. Continuity of document content The fact that Infineon offers the following product as part of the Infineon product portfolio does not lead to any changes to this document. Future revisions will occur when appropriate, and any changes will be set out on the document history page. Continuity of ordering part numbers Infineon continues to support existing part numbers. Please continue to use the ordering part numbers listed in the datasheet for ordering. www.infineon.comS29AL008J 8-Mbit (1M 8-Bit/512K 16-Bit), 3 V, Boot Sector Flash Distinctive Characteristics Architectural Advantages Performance Characteristics Single Power Supply Operation High Performance Full voltage range: 2.7 to 3.6 volt read and write operations Access times as fast as 55 ns for battery-powered applications Extended temperature range (40C to +125C) Manufactured on 110 nm Process Technology Automotive AEC-Q100 Grade 3 (40 C to +85 C) Fully compatible with 200 nm S29AL008D Automotive AEC-Q100 Grade 1 (40 C to +125 C) Secured Silicon Sector region Ultra Low Power Consumption (typical values at 5 MHz) 128-word/256-byte sector for permanent, secure 0.2 A Automatic Sleep mode current identification through an 8-word/16-byte random Electronic 0.2 A standby mode current Serial Number accessible through a command sequence 7 mA read current May be programmed and locked at the factory or by the 20 mA program/erase current customer Cycling Endurance: 1,000,000 cycles per sector typical Flexible Sector Architecture Data Retention: 20 years typical One 16 Kbyte, two 8 Kbyte, one 32 Kbyte, and fifteen 64 Kbyte sectors (byte mode) Package Options One 8 Kword, two 4 Kword, one 16 Kword, and fifteen 32 48-ball Fine-pitch BGA Kword sectors (word mode) 48-pin TSOP Sector Group Protection Features A hardware method of locking a sector to prevent any Software Features program or erase operations within that sector CFI (Common Flash Interface) Compliant Sectors can be locked in-system or via programming Provides device-specific information to the system, equipment allowing host software to easily reconfigure for different Temporary Sector Unprotect feature allows code changes Flash devices in previously locked sectors Erase Suspend/Erase Resume Unlock Bypass Program Command Suspends an erase operation to read data from, or Reduces overall programming time when issuing multiple program data to, a sector that is not being erased, then program command sequences resumes the erase operation Top or Bottom Boot Block Configurations Available Data Polling and Toggle Bits Compatibility with JEDEC standards Provides a software method of detecting program or erase Pinout and software compatible with single-power supply operation completion Flash Superior inadvertent write protection Hardware Features Ready/Busy Pin (RY/BY ) Provides a hardware method of detecting program or erase cycle completion Hardware Reset Pin (RESET ) Hardware method to reset the device to reading array data WP input pin For boot sector devices: at V , protects first or last IL 16 Kbyte sector depending on boot configuration (top boot or bottom boot) Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 002-00778 Rev. *Q Revised February 21, 2020