MA4P504-144 MACOM

MA4P504-144 Stripline PIN Diode Switch Modules V1 1 Absolute Maximum Ratings T = +25C A Features (unless otherwise specified) Broadband 50 Ohms Design Through X Band Parameter Absolution Max. High Power Capacity Voltage Ratings to 1000V Voltage Voltage Rating Fast Switching Speeds Operating Temperature - 65C to +150C Hermetically Sealed Package RoHS Compliant Storage Temperature -65C to +175C Pdiss= 150C-T ambient Description Power Dissipation Thermal Resistance This series of M/ACOM semiconductor products is hermetically sealed strip-line package PIN diode 1. Operation of this device above any one of these parameters designed to drop into a 50 ohm strip-line circuit with- may cause permanent damage. out external matching. The MA4P504-144 can be used as SPST reflective switches and are useful in Stripline Packages applications from VHF through X Band. Several modules are provided with different power and switching speed capability. This series of strip-line switch modules consist of shunt mounted passivated PIN diodes in hermetic strip-line packages. These modules are optimized for 50 ohm micro-strip and strip-line circuits. The MA4P504-144 series modules maybe operated as a switch by applying the appropriate forward and re- verse DC excitation. They can also be used as at- tenuators by varying the forward DC current. ODS-144 Applications The MA4P504-144 broadband shunt-mounted PIN diode features a shunt-mounted PIN chip with an appropriate series inductance to produce a matched Internal Wiring Diagram low pass filter structure at zero or reverse bias con- dition. By applying +10mA to +100mA to center con- ductor the diodes impedance changes to a low- impedance inductive short causing the diode to re- flect RF power. The forward bias current (+10mA to +100mA) must be applied in order to achieve high isolation. Specifications subject to change without prior notification. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P504-144 Stripline PIN Diode Switch Modules V1 Specifications Tambient = + 25C 1 Part Number Typical Typical Typical Minimum Maximum Nominal Switching 2 Frequency Insertion Isolation Reverse Thermal Speed (nS) 4 (GHz) Loss V I Voltage Resistance R F RF Off to RF On to (dB) (dB) V (C/W) R RF On RF Off (Volts) 2 MA4P504-144 4-8 0.50dB 20dB 500 20 150 30 0V 100mA 1. All models have cathode heatsink 2. Maximum SWR is 1.5:1 at specified insertion loss condition. 3. Maximum reverse current is 10A at specified voltage rating. Outline Drawing Environmental Ratings (Per MIL-STD 750) The following table is recommended for Group B and C test- ing for TX, TXV level screening. Inspection Method Condition Storage 1031 See Maximum Ratings Temperature Operating See Maximum Ratings Temperature Temperature 5 cycles 1051 Cycling - 65 to + 150C Shock 2016 500 gs Vibration 2056 15 gs Constant 2006 20,000 gs Acceleration Humidity 1021 10 days Specifications subject to change without prior notification. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.