MADL-011021-14150T PIN-Schottky Anti-Parallel Diode Limiter Rev. V2 10 MHz - 6 GHz Features Functional Schematic 3 Terminal LPF Broadband Shunt Structure 10 MHz - 6 GHz Broadband Frequency > 2.5 W Peak and CW Power Handling N/C 6 N/C 1 < 0.5 dB Shunt Insertion Loss < +15 dBm Flat Leakage Power Lead-Free 1.5 x 1.2 mm 6-lead TDFN Package o RF 5 IN RF RoHS* Compliant and 260 C Reflow Compatible 2 OUT Description N/C 4 N/C 3 The MADL-011021 is a lead-free 1.5 x 1.2 mm GND 7 TDFN surface mount plastic packaged that provides both low and high signal frequency operation from 10 MHz to 6 GHz. The anti-parallel arrangement of Top view the PIN limiter and schottky diode provides for broadband performance, eliminating the need for a shunt coil as a DC return. 3 Pin Configuration This device is ideally suitable for usage in higher frequency and lower flat leakage limiter microwave Pin No. Pin Name Description circuits applications where higher performance surface mount diode assemblies are required. 1 N/C No Connection 2 RF RF Input IN 1,2 3 N/C No Connection Ordering Information Part Number Package 4 N/C No Connection MADL-011021-14150T 3000 piece reel 5 RF RF Output OUT MADL-011021-000SMB Sample board 6 N/C No Connection 4 1. Reference Application Note M513 for reel size information. 7 Paddle Ground 2. All RF Sample boards include 5 loose parts. 3. MACOM recommends connecting unused package pins to ground. 4. The exposed pad centered on the package bottom must be connected to RF, DC, and thermal ground. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MADL-011021-14150T PIN-Schottky Anti-Parallel Diode Limiter Rev. V2 10 MHz - 6 GHz Electrical Specifications: T = +25C A Parameter Test Conditions Units Min. Typ. Max. Insertion Loss P incident = -10 dBm, F = 750 MHz dB 0.15 0.20 Return Loss P incident = -10 dBm, F = 750 MHz dB 20 P1dB Input Compression Power F = 1 GHz dBm +5 5 C.W. Incident Power F = 4 GHz dBm 34 5 Peak Incident Power 1 s, 1 % duty 4 GHz dBm 34 6 Flat Leakage Power +34 dBm, 1 s, 1 % duty 4 GHz dBm 18 6,7 Spike Leakage Power +34 dBm, 1 s, 1 % duty 4 GHz dBm 20 6,7 Spike Leakage Energy +34 dBm, 1 s, 1 % duty 4 GHz ergs 0.01 5,6,7 Recovery Time +34 dBm, 1 s, 1 % duty 4 GHz ns 100 ( 1 db of Insertion Loss ) Input 3rd Order P incident = -10 dBm, dBm 15 Intermodulation Products (IIP3) F1 = 1.000 GHz, F2 = 1.010 GHz 5. Incident power ratings defined with 1.2 1 source VSWR and 1.2:1 max load VSWR. 6. Peak incident power defined at 1 s RF pulse width, 1% duty cycle 7. Spike leakage power and recovery time values are defined at peak power conditions. 8,9 Absolute Maximum Ratings Parameter Absolute Maximum Peak Incident Power 1 s pulse, 1% duty +33 dBm (+85C) CW Incident Power +33 dBm (+85C) Junction Temperature +175C Operating Temperature -65C to +125C Storage Temperature -65C to +150C 8. Exceeding any one or combination of these limits may cause permanent damage to this device. 9. MACOM does not recommend sustained operation near these survivability limits. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: