MADP-000907-14020x Solderable AlGaAs Flip Chip PIN Rev. V8 Features Low Series Resistance Ultra Low Capacitance Millimeter Wave Switching & Cutoff Frequency Useable up to 70 GHz 2 Nanosecond Switching Speed Can be Driven by a Buffered TTL Silicon Nitride Passivation Polyimide Scratch Protection RoHS Compliant Description The MADP-000907-14020 is a solderable, flip-chip Aluminum Gallium Arsenide (AlGaAs) PIN diode. It is fabricated with MOCVD grown epitaxy using a process and design that optimizes device to device uniformity and produces extremely low parasitics. The diode exhibits an exceptionally low RC product (0.1 ps) and a 2-3 ns switching speed. The chips are fully passivated with silicon nitride and have an add- ed BCB polymer layer for scratch protection. The 1. Backside metal: 0.2 m gold over 4 m nickel. BCB protective coating prevents damage to the 2. Yellow hatched areas indicate backside ohmic gold contacts. diode junction area and anode air-bridge during handling and assembly. The ultra low capacitance of the MADP-000907- 14020 allows for operation at millimeter wave frequencies for RF switches and phase shifter applications. The diode is designed to be used in pulsed or CW applications, where single digit ns Outline Dimension switching speed is required. The low capacitance of the PIN diode makes it ideal for use in many INCHES MM microwave multi-throw switch assemblies, where the DIM series capacitance of each off port adversely loads Min. Max. Min. Max. the input and affects VSWR. A 0.029 0.030 0.750 0.765 B 0.015 0.016 0.380 0.395 C 0.007 0.008 0.175 0.195 Ordering Information D 0.004 0.005 0.101 0.127 E 0.007 0.0073 0.177 0.185 MADP-000907-14020W Waffle Pack F 0.018 0.019 0.457 0.482 MADP-000907-14020P Tape and Reel * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 111 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MADP-000907-14020x Solderable AlGaAs Flip Chip PIN Rev. V8 Electrical Specifications: T = +25C A Symbol Parameter Conditions Units Min Typ Max C Total Capacitance -10 V, 1 MHz pF 0.025 0.030 T R Series Resistance 10 mA, 1 GHz 5.2 7.0 S V Forward Voltage 10 mA V 1.33 1.45 F 3 I Reverse Leakage Current V = -45 V nA 50 R R T / 4 RISE Switching Speed 10 GHz ns 2 T FALL 3. The max rated V (-45V) is sourced and the resultant reverse leakage current, Ir, is measured to be <50nA R 4. Switching speed is measured between 10% and 90% or 90% to 10% RF voltage for a single series mounted diode. Driver delay is not included. Absolute Maximum Ratings: T = 25C A Parameter Absolute Maximum Reverse Voltage 45V Operating Temperature -55C to +125C Storage Temperature -55C to +150C Junction Temperature +175C Dissipated Power (RF + DC) 100mW C.W. Incident Power +23 dBm Mounting Temperature +280C for 10 seconds 222 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: