MAPDCC0005 Low Cost Three Way Power Splitter/Combiner Rev. V3 824 960 MHz Features Small Size and Low Profile 1 Excellent Insertion Loss 0.6 dB Typical Functional Block Diagram Superior Repeatability Low Cost CSM, AMPS, CDPD, ARDIS, RAM Frequency Coverage Lead-Free SOIC-8 Package 100% Matte Tin Plating over Copper Halogen-Free Green Mold Compound 260C Reflow Compatible RoHS* Compliant Version of DS53-0001 Description M/A-COMs MAPDCC0005 is an IC-based mono- lithic power divider in a low cost SOIC-8 plastic package. This 3-way power divider is ideally suited for applications where small size, low profile, and low cost without sacrificing Performance, are re- quired. Typical applications include Base Stations, portables and PCMCIA cards for cellular applica- tions. Available in Tape and Reel. The MAPDCC0005 is fabricated using a passive- 1. All unused pins must be RF and DC grounded. integrated circuit process. The process features full- chip passivation for increased performance and reli- ability. Pin Configuration Pin No. Function Pin No. Function Ordering Information 1 GND 5 RF OUT 2 RF IN 6 GND Part Number Package 3 GND 7 RF OUT MAPDCC0005 Bulk Packaging 4 GND 8 RF OUT MAPDCC0005TR 1000 piece reel MAPDCC0005-TB Sample Test Board Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAPDCC0005 Low Cost Three Way Power Splitter/Combiner Rev. V3 824 960 MHz Electrical Specifications: T = 25C, Z = 50 A 0 Parameter Units Min Typ Max Insertion Loss above 4.78 dB dB 0.6 0.7 Isolation dB 15 18 VSWR 1.4:1 1.6:1 Amplitude Balance dB 0.6 0.8 Phase Balance Deg 2 4 2,3 Absolute Maximum Ratings Parameter Absolute Maximum 4 Input Power 1W CW Recommended PCB Configuration Operating Temperature -40C to +85C Storage Temperature -65C to +150C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. With internal load dissipation of 0.125 W Maximum. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: