LAN9210 Small Form Factor Single-Chip Ethernet Controller with HP Auto-MDIX Support Datasheet PRODUCT FEATURES Single chip Ethernet controller Highlights Fully compliant with IEEE 802.3/802.3u standards Optimized for standard performance applications Integrated Ethernet MAC and PHY Efficient architecture with low CPU overhead 10BASE-T and 100BASE-TX support Easily interfaces to most 16-bit embedded CPUs Full- and Half-duplex support Full-duplex flow control Integrated PHY with HP Auto-MDIX support Backpressure for half-duplex flow control Integrated checksum offload engine helps reduce Preamble generation and removal CPU load Automatic 32-bit CRC generation and checking Low pin count and small body size package for small Automatic payload padding and pad removal Loop-back modes form factor system designs Flexible address filtering modes Supports audio & video streaming over Ethernet: One 48-bit perfect address multiple standard-definition (SD) MPEG2 streams 64 hash-filtered multicast addresses Pass all multicast Target Applications Promiscuous mode Basic cable, satellite, and IP set-top boxes Inverse filtering Digital video recorders Pass all incoming with status report Disable reception of broadcast packets Video-over IP solutions, IP PBX & video phones Integrated 10/100 Ethernet PHY Wireless routers & access points Supports HP Auto-MDIX Audio distribution systems Auto-negotiation Printers, kiosks, security systems Supports energy-detect power down General embedded applications Host bus interface Simple, SRAM-like interface Key Benefits 16-bit data bus 16Kbyte FIFO with flexible TX/RX allocation Non-PCI Ethernet controller for performance sensitive One configurable host interrupt applications 16-bit interface Miscellaneous features Burst-mode read support Small form factor, 56-pin QFN lead-free RoHS Compliant package Minimizes dropped packets Integrated 1.8V regulator Internal buffer memory can store over 200 packets Integrated checksum offload engine Automatic PAUSE and back-pressure flow control Mixed endian support Minimizes CPU overhead General Purpose Timer Supports Slave-DMA Optional EEPROM interface Interrupt Pin with Programmable Hold-off timer Support for 3 status LEDs multiplexed with Reduces system cost and increases design flexibility Programmable GPIO signals SRAM-like interface easily interfaces to most Single 3.3V Power Supply with 5V tolerant I/O embedded CPUs or SoCs 0C to +70C Commercial Temperature Support Reduced Power Modes Numerous power management modes Wake on LAN Magic packet wakeup Wakeup indicator event signal Link Status Change SMSC LAN9210 DATASHEET Revision 2.9 (03-01-12) Small Form Factor Single-Chip Ethernet Controller with HP Auto-MDIX Support Datasheet Order Number(s): LAN9210-ABZJ for 56-pin, QFN Lead-free RoHS Compliant package (0 to +70C Temp Range) This product meets the halogen maximum concentration values per IEC61249-2-21 For RoHS compliance and environmental information, please visit www.smsc.com/rohs Copyright 2012 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC s standard Terms of Sale Agreement dated before the date of your order (theTerms of Sale Agreemen). The product may contain design defects or errors known as anomalies which may cause the product s functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSCs website at