M5KP5.0A M5KP110CA(e3)
Screening in
5,000 Watt Transient Voltage Suppressor
reference to
Available
MIL-PRF-19500
(TVS) Protection Device
available
DESCRIPTION
This Transient Voltage Suppressor series M5KP5.0A M5KP110CA provides a range of
standoff voltage options from 5.0 to 110 V in unidirectional, bidirectional, RoHS compliant, and
SnPb solder dipped options. Multiple advanced screening levels are available for enhanced
reliability. Clamping action is almost instantaneous. As a result, they provide effective
protection from ESD or EFT per IEC61000-4-2 and IEC61000-4-4, as well as transients
caused by inductive switching and RFI. They also protect from secondary lightning effects per
61000-4-5 at the class levels specified below.
Important: For the latest information, visit our website M5KP5.0A M5KP110CA(e3)
MAXIMUM RATINGS @ 25 C unless otherwise noted
Parameters/Test Conditions Symbol Value Unit
o
Junction and Storage Temperature T and -65 to +150 C
J
T
STG
o
Thermal Resistance, Junction to Lead @ 0.375 inch R 20 C/W
JL
(9.5 mm) lead length from body
(1) o
Thermal Resistance, Junction to Ambient R 80 C/W
JA
(2)
Peak Pulse Power Dissipation 10/1000 s P 5000 W
PP
Steady-State Power Dissipation @ T = 25 C P 6 W
L D
(1)
0.375 inch (9.5 mm) from body 1.56
Unidirectional < 100 ps
T (0 volts to V min, theoretical)
clamping (
BR)
Bidirectional < 5 ns
(3)
Forward Voltage V 3.5 V
F
o
Solder Temperature @ 10 s 260 C
2
Notes: 1. When mounted on FR4 PC board with 4 mm copper pads (1 oz) and track width 1 mm, length 25 mm.
2. With impulse repetition rate (duty factor) of 0.01 % or less (also Figure 1 and 2).
3. At 100 amp peak impulse of 8.3 ms half-sine wave (unidirectional only).
MECHANICAL and PACKAGING
CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0
TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating. Solderable per MIL-STD-750, method 2026.
MARKING: Part number
POLARITY: Cathode indicated by band. No cathode band on bidirectional devices.
TAPE & REEL option: Standard per EIA-296 (add TR suffix to part number). Consult factory for quantities.
WEIGHT: Approximately 1.4 grams
See Package Dimensions on last page.
PART NOMENCLATURE
M 5K P 5.0 C A (e3)
Reliability Level* RoHS Compliance
M e3 = RoHS compliant
MA Blank = non-RoHS compliant
MX
MXL
5% Voltage Tolerance
(*see HiRel Non-Hermetic
Product Portfolio)
Polarity
C = Bi-directional
5 Kilowatt Rating
Blank = Unidirectional
Encapsulated Plastic
Stand-off Voltage Rating
Package
(see Electrical Characteristics
table)
RF01010, Rev. B (9/13/13) 2013 Microsemi Corporation Page 2 of 7