VSC3340-01 6.5 Gbps 40 40 Crosspoint Switch with Low-Power Green Modes Microsemis multichannel 6.5 Gbps crosspoint switch provides a cost- Highlights effective solution for high-speed copper interconnects. DC to 6.5 Gbps operation The VSC3340-01 is an advanced signal conditioning crosspoint switch 40 40 fully non-blocking switch capability solution uniquely capable of addressing a wide array of asynchronous, Protocol-independent operation physical layer switching and routing applications across storage, server, Advanced input equalization and output pre- video, communications and other industries. Featuring a 40 40 non- emphasis blocking, multicasting switch core with ports running at any rate up to 6.5 Gbps, the VSC3340-01 architecture provides protocol-transparent Low power green modes operation, allowing each channel to run independently and optimize low Small 23 mm 23 mm form factor power operation when running at lower speeds. VSC3340-01 supports virtually all standard and proprietary data protocols up to the maximum Applications data rate. HDMI/DVI/DisplayPort switching/routing The device incorporates Microsemis fourth-generation input equalization Broadcast video switching/routing and pre-emphasis I/O capability engineered to overcome channel PCIe repeater applications impairments experienced in todays high-density systems at multi- gigabit data rates. It can perform signal fanout, loopback, and protection Servers switching. It can also regenerate signals compromised by losses in the Storage transmission medium. Microsemis equalization provides highly effective Telecom compensation for deterministic jitter across a wide range of high-speed interconnect applications. VSC3340-01 Line Card and Central Switch Card Application Backplane Switch Card Line Card Serial DC to Serial DC to 6.5 Gbps 6.5 Gbps ASIC or 40 40 Module PHY VSC3340-01 VSC3340-01 FPGA Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction with mission-critical equipment or applications. Any performance speci cations are believed to be reliable but are not veri ed, and Buyer must conduct and complete all performance and other testing of the products, alone and together with, or installed in, any end-products. Buyer shall not rely on any data and performance speci cations or parameters provided by Microsemi. It is the Buyers responsibility to independently determine suitability of any products and to test and verify the same. The information provided by Microsemi hereunder is provided as is, where is and with all faults, and the entire risk associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in this document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice.VSC3340-01 6.5 Gbps 40 40 Crosspoint Switch with Low-Power Green Modes Speed and Protocol Support Key Speci cations 6.5 Gbps non-return-to-zero (NRZ) data bandwidth 6.5 Gbps NRZ per channel data rate Protocol-independent low power green modes when used at 2.5 V power supply lower data rates 23 mm 23 mm ip chip ball grid array package Architecture Related Products Fully non-blocking and multicasting switch core Visit www.microsemi.com for information about these related Loss of signal (LOS) detection and forwarding (supports out-of- products: band signaling) Crosspoint switches Fully asynchronous operation with <1 ns latency Ethernet MACs 40 40 switch core enables signal fanout, loopback, and Mux, demux, and transceivers protection switching Electronic dispersion compensation CDRs Signal Integrity Multiple time-constant programmable input and output equalization Wide equalization adjustment range Input EQ of 26 dB at 6.5 Gbps 9 dB of pre-emphasis Switch Core 40 40 40 Pre- 40 Equalizer Inputs 39:0 Outputs 39:0 Emphasis Registers Two-Wire Interface, Four-Wire Interface, or Parallel Interface Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for aerospace & defense, communications, data center and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs power management products timing and synchronization devices and precise time solutions, setting the worlds standard for time voice processing devices RF solutions discrete components enterprise storage and communication solutions, security technologies and scalable anti-tamper products Microsemi Corporate Headquarters Ethernet solutions Power-over-Ethernet ICs and midspans as well as custom design capabilities and services. Microsemi is One Enterprise, Aliso Viejo, CA 92656 USA headquartered in Aliso Viejo, California and has approximately 4,800 employees globally. Learn more at www.microsemi.com. Within the USA: +1 (800) 713-4113 Outside the USA: +1 (949) 380-6100 Fax: +1 (949) 215-4996 Email: sales.support microsemi.com 20102017 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are registered trademarks of Microsemi Corporation. All other www.microsemi.com trademarks and service marks are the property of their respective owners. VPPD-02565. 1.1. 7/17