CBTL06DP213 Third generation high-performance DisplayPort multiplexer Rev. 4 23 March 2017 Product data sheet 1. General description CBTL06DP213 is an NXP third generation high-performance multi-channel multiplexer, meant for DisplayPort (DP) v1.3 or Embedded DisplayPort applications operating at data rate of 1.62 Gbit/s, 2.7 Gbit/s, 5.4 Gbit/s or 8.1 Gbit/s. It is designed using NXP proprietary high-bandwidth pass-gate technology and it can be used for 1 : 2 switching or 2 : 1 multiplexing of four high-speed differential AC-coupled DP channels. Further, it is capable of switching/multiplexing of Hot Plug Detect (HPD) signal as well as Auxiliary (AUX) and Display Data Channel (DDC) signals. In order to support GPUs/CPUs that have dedicated AUX and DDC I/Os, CBTL06DP213 provides an additional level of multiplexing of AUX and DDC signals delivering true flexibility and choice. A typical application of CBTL06DP213 is on motherboards where one of two GPU DisplayPort sources needs to be selected to connect to a DisplayPort sink device or connector. A controller chip selects which path to use by setting a select signal HIGH or LOW. Due to the bidirectional nature of the signal paths, CBTL06DP213 can also be used in the reverse topology, for example, to connect one display source device to one of two display sink devices or connectors. 2. Features and benefits 1 : 2 switching or 2 : 1 multiplexing of DisplayPort (v1.3 - 8.1 Gbit/s) signals 4 high-speed differential channels with 2 : 1 multiplexing/switching for DisplayPort main link signals 1 channel with 4 : 1 multiplexing/switching for AUX or DDC signals 1 channel with 2 : 1 multiplexing/switching for HPD signal High-bandwidth analog pass-gate technology R on DP high-speed channels: 14 on Low insertion loss: 0.9 dB at 100 MHz 1.3 dB at 2.7 GHz 1.7 dB at 4 GHz 3 dB at 11.1 GHz Low crosstalk: 35 dB at 2.7 GHz Low off-state isolation: 30 dB at 2.7 GHz, 25 dB at 4 GHz Low return loss: 20.3 dB at 100 MHz 16.7 dB at 1.35 GHz 12.9 dB at 2.7 GHz 12 dB at 4 GHzCBTL06DP213 NXP Semiconductors Third generation high-performance DisplayPort multiplexer Very low intra-pair skew (5 ps typical) Very low inter-pair skew (< 80 ps) Switch/multiplexer position select CMOS input DDC and AUX ports tolerant to being pulled to +5 V via 2.2 k resistor Supports HDMI/DVI incorrect dongle connection Single 3.3 V power supply Operation current of 2 mA typical, ESD 2 kV HBM, 500 V CDM Available in 5 mm 5 mm, 0.5 mm ball pitch TFBGA48 package 3. Applications Motherboard applications requiring DisplayPort and PCI Express switching/multiplexing Docking stations Notebook computers Chip sets requiring flexible allocation of PCI Express or DisplayPort I/O pins to board connectors 4. Ordering information Table 1. Ordering information Type number Topside Solder process Package mark Name Description Version CBTL06DP213EE 6D213 Pb-free (SnAgCu TFBGA48 plastic thin fine-pitch ball grid array package SOT918-1 1 solder compound) 48 balls body 5 5 0.8 mm 1 Total height including solder balls after printed circuit board mounting = 1.15 mm maximum. For more information on product marking, refer to www.nxp.com/products/related/package-markings.html. 4.1 Ordering options Table 2. Ordering options Type number Orderable part number Package Packing method Minimum Temperature order quantity CBTL06DP213EE CBTL06DP213EE,118 TFBGA48 Reel 13 Q1/T1 3000 T = 40 Cto+105 C amb *standard mark SMD CBTL06DP213 All information provided in this document is subject to legal disclaimers. NXP Semiconductors N.V. 2017. All rights reserved. Product data sheet Rev. 4 23 March 2017 2 of 17