Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductors system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore ( ), the underscore ( ) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore ( ). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild questions onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductors product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. Typical parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.FIN224AC 22-Bit Bi-Directional Serializer/Deserializer Click here for this datasheet translated into Korean April 2011 FIN224AC 22-Bit Bi-Directional Serializer/Deserializer Features Description Industry smallest 22-bit Serializer/Deserializer pair The FIN224AC SerDes is a low-power serializer/ deserializer (SerDes) that can help minimize the cost Low power for minimum impact on battery life and power of transferring wide signal paths. Through the Multiple power-down modes use of serialization, the number of signals transferred 100nA in standby mode, 5mA typical operating from one point to another can be significantly reduced. conditions Typical reduction is 4:1 to 6:1 for unidirectional paths. Highly rolled LVCMOS edge rate option to meet For bidirectional operation, using half duplex for multiple regulatory requirements sources, it is possible to reach signal reduction close to Cable reduction: 25:4 or greater 10:1. Through the use of differential signaling, shielding and EMI filters can also be minimized, further reducing Differential signaling: 90dBm EMI when using CTL in lab conditions the cost of serialization. The differential signaling is also Minimized shielding important for providing a noise-insensitive signal that can Minimized EMI filter withstand radio and electrical noise sources. Major Minimum susceptibility to external interference reduction in power consumption allows minimal impact Up to 22 bits in either direction on battery life in ultra-portable applications. It is possible to use a single PLL for most applications including bi- Voltage translation from 1.65V to 3.6V directional operation. High ESD protection: > 15kV HBM Parallel I/O power supply (V ) range, 1.65V - 3.6V DDP FIN224AC to FIN24AC Comparison Can support Microcontroller or RGB pixel interface Up to 20% power reduction Double wide CKP pulse on FIN224AC, Mode 3 Applications Rolled edge rate for deserializer outputs on Image sensors FIN224AC, for single display applications Small displays Same voltage range LCD, cell phone, digital camera, portable gaming, Same pinout and package printer, PDA, video camera, automotive Ordering Information Operating Order Packing Temperature Package Description Number Method Range 42-Ball, Ultra-Small Scale Ball Grid Array (USS-BGA), FIN224ACGFX -30 to +70C Tape and Reel JEDEC MO-195, 3.5mm Wide (Slow LVCMOS Edge Rate) 40-Terminal, Molded Leadless Package (MLP), Quad, FIN224ACMLX -30 to +70C Tape and Reel JEDEC MO-220, 6mm Square (Slow LVCMOS Edge Rate) TM SerDes is a trademark of Fairchild Semiconductor Corporation. 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com FIN224AC Rev.1.1.6