ON Semiconductor Is Now To learn more about onsemi, please visit our website at www.onsemi.com onsemi andand other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba onsemi or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided as-is and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. Typical parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and holdo nsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. FXLA102 Low-Voltage Dual-Supply 2-Bit Voltage Translator FXLA102 Low-Voltage Dual-Supply 2-Bit Voltage Translator with Configurable Voltage Supplies and Signal Levels, 3-State Outputs, and Auto Direction Sensing Features Description Bi-Directional Interface betw een Tw o Levels: The FXLA102 is a configurable dual-voltage supply from 1.1 V to 3. 6V translator for both uni-directional and bi-directional voltage translation betw een tw o logic levels. The device Fully Configurable: Inputs and Outputs Track VCC allow s translation betw een voltages as high as 3.6 V to Level as low as 1.1 V. The A port tracks the V level and the CCA Non-Preferential Pow er-Up Either V May Be CC B port tracks the V level. This allow s for bi-directional CCB Pow ered Up First voltage translation over a variety of voltage levels: 1.2 V, 1.5 V, 1.8 V, 2.5 V, and 3.3 V. Outputs Sw itch to 3-State if Either VCC is at GND The device remains in three-state as long as either Pow er-Off Protection V =0 V, allow ing either V to be pow ered up first. CC CC Bus-Hold on Data Inputs Eliminates the Need for Internal pow er-dow n control circuits place the device in Pull-Up Resistors Do Not Use Pull-Up Resistors on 3-state if either V is removed. CC A or B Ports The /OE input, w hen HIGH, disables both the A and B Control Input (/OE) Referenced to V Voltage CCA ports by placing them in a 3-state condition. The /OE TM input is supplied by V . CCA Packaged in MicroPak 8 (1.6 mm x 1.6 mm) Direction Control Not Necessary The FXLA102 supports bi-directional translation w ithout the need for a direction control pin. The tw o ports of the 100 Mbps Throughput w hen Translating Betw een device have auto-direction sense capability. Either port 1.8 V and 2.5 V may sense an input signal and transfer it as an output signal to the other port. ESD Protection Exceeds: - 15 kV HBM ((B Port I/O to GND) per JESD22- A114 & Mil Std 883e 3015.7) - 8 kV HBM ((A Port I/O to GND) per JESD22-A114 & Mil Std 883e 3015.7) - 2 kV CDM (per ESD STM 5.3) Ordering Information Operating Top Packing Part Number Package Temperature Mark Method Range 5 K Units Tape TM FXLA102L8X XF -40 to 85C 8-Lead MicroPak 1.6 mm x 1.6 mm Package and Reel 2009 Semiconductor Components Industries, LLC. Publication Order Number: October-2017, Rev. 2 FXLA102/D