ON Semiconductor Is Now To learn more about onsemi, please visit our website at www.onsemi.com onsemi andand other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba onsemi or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided as-is and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. Typical parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and holdo nsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. MT9V034 1/3Inch WideVGA CMOS Digital Image Sensor General Description The MT9V034 is a 1/3-inch wide-VGA format CMOS active-pixel digital image sensor with global shutter and high dynamic range www.onsemi.com (HDR) operation. The sensor has specifically been designed to support the demanding interior and exterior surveillance imaging needs, which makes this part ideal for a wide variety of imaging applications in real-world environments. This wide-VGA CMOS image sensor features ON Semiconductors breakthrough low-noise CMOS imaging technology that achieves CCD image quality (based on signal-to-noise ratio and low-light sensitivity) while maintaining the inherent size, cost, and integration advantages of CMOS. The active imaging pixel array is 752 H x 480 V. It incorporates CLCC48 11.43 x 11.43 CASE 848AN sophisticated camera functions on-chip-such as binning 2 x 2 and 4 x 4, to improve sensitivity when operating in smaller resolutions-as well as windowing, column and row mirroring. It is programmable through a simple two-wire serial interface. ORDERING INFORMATION The MT9V034 can be operated in its default mode or be See detailed ordering and shipping information on page 2 of this data sheet. programmed for frame size, exposure, gain setting, and other parameters. The default mode outputs a wide-VGA-size image at 60 frames per second (fps). ADC: On-chip, 10-bit Column-parallel An on-chip analog-to-digital converter (ADC) provides 10 bits per (Option to Operate in 12-bit to 10-bit pixel. A 12-bit resolution companded for 10 bits for small signals can Companding Mode) be alternatively enabled, allowing more accurate digitization for Automatic Controls: Auto Exposure Control darker areas in the image. In addition to a traditional, parallel logic output the MT9V034 also (AEC) and Auto Gain Control (AGC) features a serial low-voltage differential signaling (LVDS) output. The Variable Regional and Variable Weight sensor can be operated in a stereo-camera, and the sensor, designated AEC/AGC as a stereo-master, is able to merge the data from itself and the Support for Four Unique Serial Control stereo-slave sensor into one serial LVDS stream. Register IDs to Control Multiple Imagers on The sensor is designed to operate in a wide temperature range the Same Bus (30C to +70C). Data Output Formats: Features Single Sensor Mode: Array format: Wide-VGA, Active 752 H x 480 V (360,960 Pixels) 10-bit Parallel/stand-alone 8-bit or 10-bit Serial LVDS Global Shutter Photodiode Pixels Simultaneous Integration and Readout Stereo Sensor Mode: Interspersed 8-bit Serial LVDS RGB Bayer or Monochrome: NIR Enhanced Performance for Use with Non-visible NIR Illumination High Dynamic Range (HDR) Mode Readout Modes: Progressive or Interlaced Applications Shutter Efficiency: >99% Security Simple Two-wire Serial Interface High Dynamic Range Imaging Real-Time Exposure Context Switching Dual Register Set Unattended Surveillance Register Lock Capability Stereo Vision Window Size: User Programmable to any Smaller Format (QVGA, Video as Input CIF, QCIF). Data Rate can be Maintained Independent of Window Machine Vision Size Automation Binning: 2 x 2 and 4 x 4 of the Full Resolution Semiconductor Components Industries, LLC, 2008 1 Publication Order Number: January, 2017 Rev. 7 MT9V034/D