NBA3N012C 3.3 V Automotive Grade LVDS Line Receiver Description The NBA3N012C is a single LVCMOS Output Differential Line Receiver for Low Power and high data rate Automotive applications. The device is optimized to support data rate higher than 400 Mbps www.onsemi.com (200 MHz). The NBA3N012C accept directly LVDS signal as an input and translate it to LVCMOS output levels. The device includes an MARKING input termination resistor minimizing number of the external DIAGRAM components for point to point interface. 5 The NBA3N012C is offered in 5 lead SOT23 package and it is SOT235 shipping in 3000 pcs tape & reel. 12CAYW DT SUFFIX CASE 527AH Features 1 Compatible with TIA/EIA644A Standard 12C = Specific Device Code Automotive Grade AECQ100 Grade 1 A = Assembly Code > 400 Mbps (200 MHz) Data Rate Y = Year W = Work Week Operating Range: V = 3.3 V 0.3 V DD = PbFree Package Typical 100 ps Differential Skew (Note: Microdot may be in either location) Maximum Propagation Delay of 3.5 ns Low Power Dissipation (Typical 20 mW 3.3 V) LOGIC DIAGRAM SOT235 Lead Package with Pinout optimized for easy PCB Layout Integrated Line Termination Resistor of 100 IN Power Down High Impedance on LVDS Pins Inputs Accept LVDS/CML/LVPECL Signals Q R Temperature Operating Range 40C to +125C These are PbFree Devices IN Typical Applications: Automotive: Head Lamp Lighting for Cars Telecom: Wireless, Microwave and Optical PINOUT DIAGRAM Table 1. PIN DESCRIPTION Pin Number Pin Name I/O Type Description V 1 5 Q DD 1 V Power Supply Pin DD GND 2 2 GND Ground Pin 3 IN Input NonInverting Input Pin IN 3 IN 4 4 IN Input Inverting Input Pin 5 Q Output Output Pin Table 2. TRUTH TABLE ORDERING INFORMATION Inputs Output Device Package Shipping IN IN Q NBA3N012CSNT1G SOT235 3000 / Tape & V +0.1 V H ID (PbFree) Reel V 0.1 V L ID For information on tape and reel specifications, including part orientation and tape sizes, please Full Fail Safe OPEN/SHORT or terminated H or L refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Semiconductor Components Industries, LLC, 2016 1 Publication Order Number: December, 2016 Rev. 0 NBA3N012C/DNBA3N012C Table 3. ATTRIBUTES (Note 1) Characteristics Value ESD Protection Human Body Model (JEDEC Standard 22, Method A114E) All Pins 8 kV Charge Device Model (JEDEC Standard 22, Method C101D) All Pins 1.25 kV Moisture Sensitivity (Note 1) Level 1 Flammability Rating Oxygen Index: 28 to 34 UL 94 Code V0 A 0.125 in 28 to 34 1. For additional information, see Application Note AND8003/D Table 4. MAXIMUM RATINGS (Note 2) Symbol Parameter Rating Unit V Supply voltage 0.30 V +4.0 V DD DD V Input Voltage (IN, IN) LVDS 0.30 to +3.90 V IN V Output Voltage (Pin Q) LVCMOS 0.30 to (V + 0.30) V Q DD I Output Short Circuit Current (Pin Q) 100 mA OS Tj Maximum Junction Temperature 135 C Tstg Storage Temperature Range 65 to +150 C Thermal resistance (JunctiontoCase) (Note 3) 107 C/W JC Thermal resistance (JunctiontoAmbient) (Note 3) 138.5 C/W JA T Lead Temperature Soldering (4 Seconds) SOLDERRM/D 260 C sol PD Package Power Dissipation 25C Derating of 7.22 mW/C above 25C 794 mW Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 2. The maximum ratings applied are individual stress limit values and not valid simultaneously. 3. JEDEC standard multilayer board 2S2P (2 signal 2 power) Table 5. DC CHARACTERISTICS V = 3.3 V 0.3 V, GND = 0 V, T 40C to +125C (Note 4) DD A Symbol Parameter Test Conditions Min Typ Max Unit I No Load Supply Current Pin: V Inputs Open 5.4 9 mA DD DD V Output High Voltage Pin: Q I = 0.4 mA, 2.4 3.1 V OH OH Inputs shorted or terminated, V = +200 mV ID V Output Low Voltage Pin: Q I = 2 mA, V = 200 mV 0.3 0.5 V OL OL ID I Output Short Circuit Current Pin: Q V = 0 V 15 50 100 mA OS Q V Input Clamp Voltage I = 18 mA 1.5 0.7 V CL CL Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 4. minus sign indicated only direction. Current into the device is defined as positive. I is specified as magnitude only. OS Table 6. ELECTRICAL CHARACTERISTICS V = 3.3 V 0.3 V, GND = 0 V, T 40C to +125C, Pin: IN/IN (Note 5) DD A Symbol Parameter Test Conditions Min Typ Max Unit V Differential Input High Threshold V dependent on V +30 +100 mV TH CM DD V Differential Input Low Threshold 100 30 mV TL V Offset Voltage 0.1 2.35 V CM I Input Current V = 0 V or 3.6 V V = +2.8 V 10 1 +10 A IN IN DD V = 0 V 10 1 +10 A IN V = +3.6 V V = 0 V 20 +20 A IN DD I Differential Input Current V = +0.4 V, V = +0 V 3.0 3.9 4.4 mA IND IN IN V = +2.4 V, V = +2.0 V IN IN R Integrated Termination Resistor 100 T C Input Capacitance IN = IN = GND 3 pF IN 5. minus sign indicated only direction. Current into the device is defined as positive. www.onsemi.com 2