NTSV20100CT Very Low Forward Voltage Trench-based Schottky Rectifier Exceptionally Low V = 0.50 V at I = 5 A F F NTSV20100CT MAXIMUM RATINGS Rating Symbol Value Unit Peak Repetitive Reverse Voltage V 100 V RRM Working Peak Reverse Voltage V RWM DC Blocking Voltage V R Average Rectified Forward Current I A F(AV) (Rated V , T = 130C) R C Per device 20 Per diode 10 Peak Repetitive Forward Current I A FRM (Rated V , Square Wave, 20 kHz, T = 125C) R C Per device 40 Per diode 20 Nonrepetitive Peak Surge Current I A FSM (Surge applied at rated load conditions halfwave, single phase, 60 Hz) 100 Operating Junction Temperature T 40 to +150 C J Storage Temperature T 40 to +150 C stg Voltage Rate of Change (Rated V ) dv/dt 10,000 V/ s R Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS Rating Symbol Value Unit Maximum Thermal Resistance C/W JunctiontoCase R 2.0 JC JunctiontoAmbient R 70 JA ELECTRICAL CHARACTERISTICS (Per Leg unless otherwise noted) Rating Symbol Typ Max Unit Maximum Instantaneous Forward Voltage (Note 1) v V F (I = 5 A, T = 25C) 0.55 F J (I = 10 A, T = 25C) 0.65 0.98 F J (I = 5 A, T = 125C) 0.50 F J (I = 10 A, T = 125C) 0.58 0.82 F J Maximum Instantaneous Reverse Current (Note 1) I R (V = 70 V, T = 25C) 17 A R J (V = 70 V, T = 125C) 5.3 mA R J (Rated dc Voltage, T = 25C) 800 A J (Rated dc Voltage, T = 125C) 12 25 mA J Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 1. Pulse Test: Pulse Width = 300 s, Duty Cycle 2.0%