Surface Mount Schottky Power Rectifier SMA Power Surface Mount Package MBRA140, NRVBA140, NRVBA140N, SBRA140N, www.onsemi.com SBRA401N This device employs the Schottky Barrier principle in a large area SCHOTTKY BARRIER metaltosilicon power diode. State of the art geometry features RECTIFIER epitaxial construction with oxide passivation and metal overlay 1.0 AMPERES contact. Ideally suited for low voltage, high frequency rectification, or 40 VOLTS as free wheeling and polarity diodes in surface mount applications where compact size and weight are critical to the system. Features Small Compact Surface Mountable Package with JBent Leads SMA Rectangular Package for Automated Handling CASE 403D Highly Stable Oxide Passivated Junction MARKING DIAGRAM Very Low Forward Voltage Drop Guardring for Stress Protection B14 NRVBA & SBRA Prefix for Automotive and Other Applications AYWW Requiring Unique Site and Control Change Requirements AECQ101 Qualified and PPAP Capable* B14 = Specific Device Code These Devices are PbFree, Halogen Free/BFR Free and are RoHS A = Assembly Location** Compliant Y = Year WW = Work Week Mechanical Characteristics = PbFree Package Case: Epoxy, Molded (Note: Microdot may be in either location) Weight: 70 mg (approximately) **The Assembly Location code (A) is front side Finish: All External Surfaces Corrosion Resistant and Terminal optional. In cases where the Assembly Location is stamped in the package bottom (molding ejecter pin), Leads are Readily Solderable the front side assembly code may be blank. Lead and Mounting Surface Temperature for Soldering Purposes: 260C Max. for 10 Seconds ORDERING INFORMATION Shipped in 12 mm tape, 5000 units per 13 inch reel Device Package Shipping Polarity: Cathode Lead Indicated by Either Notch in Plastic Body MBRA140T3G SMA 5,000 / or Polarity Band (PbFree) Tape & Reel NRVBA140T3G* SMA 5,000 / (PbFree) Tape & Reel 5,000 / NRVBA140NT3G* SMA Tape & Reel (PbFree) SBRA140NT3G* SMA 5,000 / (PbFree) Tape & Reel SMA 5,000 / SBRA401NT3G* (PbFree) Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Semiconductor Components Industries, LLC, 2013 1 Publication Order Number: February, 2020 Rev. 12 MBRA140T3/DMBRA140, NRVBA140, NRVBA140N, SBRA140N, SBRA401N MAXIMUM RATINGS Rating Symbol Value Unit Peak Repetitive Reverse Voltage V 40 V RRM Working Peak Reverse Voltage V RWM DC Blocking Voltage V R Average Rectified Forward Current I A O (At Rated V , T = 95C) 1.0 R C Peak Repetitive Forward Current I A FRM (At Rated V , Square Wave, 20 kHz, T = 100C) 2.0 R C NonRepetitive Peak Surge Current I A FSM (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) 30 Storage Temperature T 55 to +150 C stg Operating Junction Temperature T 55 to +125 C J Voltage Rate of Change dv/dt V/ s (Rated V , T = 25C) 10,000 R J ESD Ratings: V Machine Model = C > 400 Human Body Model = 3B > 8000 Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS Symbol Value Unit Characteristic Thermal Resistance, JunctiontoLead (Note 1) R 35 C/W JL Thermal Resistance, JunctiontoAmbient (Note 1) R 86 JA 1. Mounted on 2 Square PC Board with 1 Square Total Pad Size, PC Board FR4. ELECTRICAL CHARACTERISTICS Symbol Value Unit Characteristic V T = 25C T = 100C V F J J Maximum Instantaneous Forward Voltage (Note 2) 0.55 0.505 (I = 1.0 A) F 0.71 0.74 see Figure 2 for other Values (I = 2.0 A) F I T = 25C T = 100C mA R J J Maximum Instantaneous Reverse Current 0.5 10 (V = 40 V) R 0.1 4.0 see Figure 4 for other Values (V = 20 V) R Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. Pulse Test: Pulse Width 250 s, Duty Cycle 2.0%. www.onsemi.com 2