20W Interchangeable Wall Plug Adapter Series + Features Double Insulated Field Changeable AC Plugs Sold Separately US DoE Level VI Efficiency Compliance Ecodesign ErP Lot 7 (EU) 2019/1782 Compliance EU CoC Ver 5 Tier 2 Compliance AS/NZS4665.1-2005+A1:2009, AS/NZS4665.2-2005+A1:2009 Compliance Class B EMI Applications Peripherals Gaming Machines Point of Sales Equipment Network Equipment Phihong Taiwan - No.568, Fuxing 3rd Rd., Guishan Dist.,Taoyuan City (33383), Taiwan, ROC Phihong is not responsible for any error and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date Phihong USA - 47800 Fremont Blvd. Fremont, CA 94538, USA specifications and contact information. Revised 10/8/2020 Phihong Europe - Wattstraat 50, 2171 TR Sassenheim, The Netherlands 1 PSAA20R Specifications 2 2 2 Model PSAA20R-120L6-R PSAA20R-240L6-R PSAA20R-480L6-R DC Output Voltage 12.0V 24.0V 48.0V Max Current 1.67A 0.83A 0.42A Output Output Power 20.04W 19.92W 20.16W Regulation 5% 5% 5% 3 Ripple & Noise P-P(max) 120mV 240mV 480mV AC Input Voltage Range 90 to 264VAC AC Input Frequency 47 to 63Hz 0.5A (RMS) max for 120Vac/max load Input Current 0.25A (RMS) max for 240Vac/max load 40A max for 120VAC, 80A max for 240VAC Inrush Current (Cold start at ambient 25C, full load) No Load Power Consumption 0.037W 0.039W 0.039W at 115VAC Input Input No Load Power Consumption 0.060W 0.068W 0.061W at 230VAC Input 4 115VAC Average Efficiency 86.70% 88.20% 88.40% 4 230VAC Average Efficiency 87.00% 87.20% 87.50% 4 230VAC 10% Load Efficiency 80.80% 76.80% 77.20% Leakage Current 0.25mA max Over-Voltage <23V Auto restart <35V Auto restart <62V Auto restart Protection Short Circuit The output can be shorted without damage Over-Current Short circuit. Auto restart. Operating Temperature 0C to +40C Environmental Non-Operating Temperature -20 to +75C Operating Humidity 20% to 90% Dielectric Withstand (HI-POT) Primary to Secondary: 3000VAC for 1min, 10mA Insulation Resistance Primary to Secondary: >7M ohm for 500VDC Standards cULus 60950-1, IEC60950-1, AS/NZS 60950-1 FCC Part 15 Class B, CAN ICES-003(B)/NMB-003(B), Safety EMI Emissions EN 55032/CISPR 32 Class B Conducted and Radiated Approvals and EMC Harmonic Current Emissions IEC 61000-3-2 Voltage Fluctuations & Flicker IEC 61000-3-3 EN 55024/CISPR 24: IEC 61000-4-2 (+/- 8kV air, +/- 4kV contact), Immunity IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5 (+/- 1kV), IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11 Dimensions (L x W x H) 72.5mm (2.85in) x 50.8mm (2.00in) x 33.25mm (1.31in) Weight 120g DC Cord Length 1500mm Mechanical Output Cable Type 18 AWG 24 AWG DC Output Connector 5.5mm x 2.1mm x 9.5mm 5.5mm x 2.1mm x 10mm 1. The specifications defined are at ambient temperature of 25C, unless otherwise specified. 2. Not recommended for new designs (NRND). Minimum order quantity applies. 3. 20MHz bandwidth frequency oscilloscope, add a 0.1F multilayer Cap. and Low ESR Electrolytic Cap. (10F) at output connector Notes terminals (nominal line voltage, full load). 4. Efficiency is measured after 30 minutes burn-in. Phihong is not responsible for any error and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 10/8/2020