PE42430MLAB-Z pSemi

ESD Product Specification PE42430 UltraCMOS SP3T Reflective Product Description RF Switch 100 3000 MHz The PE42430 is a HaRP-enhanced reflective SP3T RF switch developed on the UltraCMOS process Features technology. This tiny general purpose switch is ideal for WLAN and bluetooth applications in the 2.4 - 2.5 GHz HaRP-enhanced UltraCMOS device bands as well as general broadband switching Low insertion loss applications. It is comprised of three RF ports and has Typical 0.45 dB 1 GHz low insertion loss and high isolation. An on-chip CMOS Typical 0.55 dB 2.5 GHz decode logic facilitates a three-pin CMOS control interface. Unlike competitive solutions, there is no need IIP3: Typical +66 dBm for blocking capacitors when using the PE42430. P0.1dB Compression: Typical +30 dBm Excellent ESD tolerance of 4500V HBM Peregrines HaRP technology enhancements deliver and 250V MM on all ports high linearity and exceptional harmonics performance. It is an innovative feature of the UltraCMOS process, No external V required. V is derived DD DD providing performance superior to GaAs with the from switch control inputs economy and integration of conventional CMOS. Package type: 8-lead 1.5 x 1.5 mm DFN Figure 1. Functional Diagram Figure 2. Package Type 8-lead 1.5 x 1.5 mm DFN RFC RF1 RF3 ESD ESD RF2 ESD CMOS Control/Driver and ESD V1 V2 V3 71-0086-01 Document No. 70-0326-04 www.psemi.com 2010-2012 Peregrine Semiconductor Corp. All rights reserved. Page 1 of 11 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: PE42430 Product Specification 1 Table 1. Electrical Specifications : Nominal 25C, V1, V2 or V3 = 3V/5V (Z = Z = 50 ) S L Electrical Parameter Path Condition Min Typ Max Unit 100 3000 MHz Operating Frequency 0.45 0.56 dB Insertion Loss 100 to 1000 MHz RFC-RFX 0.65 0.9 dB 1000 to 3000 MHz 0.55 0.8 dB 2400 to 2500 MHz 35 40 dB Isolation 100 to 1000 MHz RFX-RFX 23 28 dB 1000 to 3000 MHz 25 30 dB 2400 to 2500 MHz 34 40 dB Isolation 100 to 1000 MHz RFC-RFX 23 28 dB 1000 to 3000 MHz 25 30 dB 2400 to 2500 MHz 22 dB Return Loss (Active Port) 100 to 1000 MHz RFX 16 dB 1000 to 3000 MHz 18 dB 2400 to 2500 MHz 22 dB Return Loss (Common Port) 100 to 1000 MHz RFC 16 dB 1000 to 3000 MHz 18 dB 2400 to 2500 MHz 2 RFC-RFX 30 dBm Input 0.1 dB compression 100 to 3000 MHz RFC-RFX 66 dBm IIP3 100 to 3000 MHz RFC-RFX 100 dBm IIP2 100 to 3000 MHz 3 500 nS Switching Time 50% CTRL to 90% or 10% of final value 4 Turn on Time 50% CTRL to 90% or 10% of RF 1.5 2.0 S 5 10 mV Video Feedthrough Notes: 1. Specifications under min and max nominal conditions 2. Please refer to Maximum Input Power (50 ) in Table 4 3. Switching time is measured while the part is powered on and one of the control pins is switching state 4. Turn on time is defined as the time it takes the part to go from an unpowered state to 90% RF voltage. Max power can only be applied after the part is turned on 5. Video feedthrough is measured by terminating all ports and measuring peak transients while switching logic state 2010-2012 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0326-04 UltraCMOS RFIC Solutions Page 2 of 11 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: