885048 Qorvo

885048 1882.5 MHz BAW Filter RFMD + TriQuint = Qorvo Applications General purpose RF filterwireless Wireless infrastructure 4G, Multi-standard Band 25 Uplink SMP-12A - 3.00 x 3.00 x 1.22 mm Functional Block Diagram Product Features Top View Usable bandwidth 65 MHz High Attenuation 6 1 Gnd Gnd Low Loss Single-ended operation Input Output 5 2 Matching required for operation at 50 Small size 3.00 x 3.00 x 1.22 mm Ceramic Surface Mount Package (SMP) 3 4 Gnd Gnd Hermetically sealed Pb RoHS compliant, Pb-free General Description Pin Configuration 885048 is a general purpose Uplink filter for Band 25. Pin No. Label This filter was specifically designed in a 3x3mm hermetic 2 Input package for Base Station applications and is part of our 5 Output wide portfolio of RF filters in the same package. Low insertion loss, coupled with high attenuation and 1,3,4,6 Case Ground excellent power handling, makes this filter a natural choice for our customers Uplink RF filtering needs and other general purpose applications Ordering Information Part No. Description 885048 Packaged part 885048-EVB Evaluation board Standard T/R size = 5,000 units/reel Preliminary Data Sheet: Rev F 08-17-15 Disclaimer: Subject to change without notice - 1 of 6 - 2015 TriQuint www.triquint.com /w w w .q o rv o .com 885048 1882.5 MHz BAW Filter RFMD + TriQuint = Qorvo Absolute Maximum Ratings 1. Operation of this device outside the parameter ranges Parameter Rating given may cause permanent damage (1) Storage Temperature -40 to + 85 C 2. Input Power with applied CW signal at +95C for 1000 (1)(2)(3) hours Operable Temperature - 30 to + 105 C 3. Input Power with applied CW signal at +105C for 24 (1) (2) RF Input Power +30 dBm hours (1) (3) RF Input Power +22 dBm (1) Electrical Specifications Conditions unless otherwise noted: Device Temperature = -30C to +85C. (2) (3) Parameter Conditions Min Typ Max Units Center Frequency - 1882.5 - dB 1850 1915 MHz 2.5 3.0 Maximum Insertion Loss - dB (7) 18501915 MHz at +105C 2.5 3.6 (4) 1850 1915 MHz 1.3 2.0 Amplitude Variation - dB p-p (7) 18501915 MHz at +105C 1.3 2.1 Amplitude Variation (any 1850 1915 MHz 0.7 1.0 - dB p-p (4) (7) 3.84 MHz in passband) 18501915 MHz at +105C 0.7 1.1 10 450 MHz 40 51 - 450 1470 MHz 30 38 - 1470 1560 MHz 36.5 42 - (7) 14701560 MHz at +105C 36.5 42 - 1560 1670 MHz 39 46 - 1670 1774 MHz 30 35 - 1774 1815 MHz 25 32 - 1815 1830 MHz 29 35 - (5) Absolute Attenuation dB 18301831.4 MHz 21 27 - 19301931.5 MHz 15 38 - 1931.51970 MHz 21 42 - 1970 1995 MHz 40 52 - 1995 2300 MHz 35 41 - 2300 2410 MHz 30 38 - 2410 3840 MHz 20 25 - 3840 4000 MHz 20 24 - 1850 1915 MHz 2.1:1 2.5:1 Input VSWR - (7) 18501915 MHz at +105C 2.1:1 2.7:1 1850 1915 MHz 2.1:1 2.5:1 Output VSWR - (7) 18501915 MHz at +105C 2.1:1 2.6:1 (6) Source / Load Impedance - 50 - Notes: 1. All specifications are based on the TriQuint schematic shown on page 3 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Typical values are based on average measurements at room temperature 4. Describes the total variation over the defined frequency range 5. Relative zero dB 6. This is the optimum impedance in order to achieve the performance shown 7. Extended temperature operation: the filter can be operated up to +105C with de-rated specification as noted. Preliminary Data Sheet: Rev F 08-17-15 Disclaimer: Subject to change without notice - 2 of 6 - 2015 TriQuint www.triquint.com /w w w .q o rv o .com