AG606 Push-Pull CATV Amplifier Product Features Product Description Functional Diagram The AG606 is a dual amplifier containing two internal 50 1000 MHz 1 8 matched amplifiers optimal for a push-pull configuration. 0.7 dB Gain Flatness The internal amplifiers employ InGaP HBT technology 2 7 +20 dBm P1dB for a cost-effective low-distortion solution. +37 dBm Output IP3 3 6 +73 dBm Output IP2 The AG606 is ideal for drop amplifiers, splitters, and 4 5 other low to moderate power outside plant CATV -68 dBc CTB +34 dBmV/channel, 79 channels applications. The amplifier can also be useful in low power headend applications such as linear laser drivers. -80 dBc CSO Function Pin No. +34 dBmV/channel, 79 channels Amp 1 Input 1 The AG606 has excellent VSWR when used in a 75 Matched amplifiers for a Amp 2 Input 4 push-pull configuration. It is provided in a low-cost Amp 2 Output 5 push-pull configuration environmentally-friendly lead-free/green/ RoHS-compliant Amp 1 Output 8 +7V Single Positive Supply SOIC-8 package. 2, 3, 6, 7, MTTF > 1000 Years Ground Backside paddle Applications CATV Head End Equipment CATV Line Amplifiers FTTH Repeaters (1) (3) Single-ended Device Specifications Typical Performance Parameter Units Min Typ Max Parameter Units Typical Test Frequency MHz 800 Frequency MHz 50 250 450 860 (4) Gain dB 13.2 14.3 15.5 Gain dB 14.3 14.2 13.9 12.9 (2) Output IP3 dBm +33.5 +36 Input R. L. dB 21 28 18 11 Device Current mA 76 82.5 90 Output R. L. dB 17 18 16 18 (5) Device Voltage V 5.25 CTB dBc -69 -67 -67 (5) CSO dBc -81 -87 -80 1. Test conditions unless otherwise noted: T = 25 C, 800 MHz on each individual single-branch (5) amplifier in a 50 test fixture using a +7V supply and a 20.5 dropping resistor. XMOD dBc -60 -61 -60 2. 3OIP measured with two tones at an output power of +5 dBm/tone separated by 1 MHz. The suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule. Output P1dB dBm +20.7 +20.5 +20.3 +22 3. Typical parameters reflect performance in a push-pull application circuit. (6) Output IP2 dBm +73.6 +76.1 +76.4 +76.6 4. Balun, board, and connector losses have not been extracted, but typically account of 0.4 dB loss midband and 1.1 dB loss at 860 MHz. (2) Output IP3 dBm +37.5 +37.5 +37.3 +39.2 5. Measured at +34 dBmV/channel, 79 channels Flat Loading. (4) 6. OIP2 is measured at f1 + f2 at +5 dBm / tone. Noise Figure dB 5 5 5.3 5.9 Device Bias V +5.25 V 165 mA Absolute Maximum Rating Parameter Rating Storage Temperature -55 to +125 C Ordering Information Supply Voltage +7 V RF Input Power (continuous) +13dBm Part No. Description Thermal Resistance, Rth 63 C/W Push-pull CATV Amplifier AG606-G (lead-free /Green/ RoHS-compliant SOIC8 Pkg) Max Junction Temperature, T J 177 C 6 For 10 hours MTTF AG606-PCB Fully Assembled CATV Evaluation Board Operation of this device above any of these parameters may cause permanent damage. Standard T/R size = 500 pieces on a 7 reel. TriQuint Semiconductor, Inc Phone +1-503-615-9000 FAX: +1-503-615-8900 e-mail: info-sales tqs.com Web site: www.TriQuint.com Page 1 of 5 July 2009 AG606 Push-Pull CATV Amplifier Typical Device Data 50 Z 0 S-Parameters (V = +5.25 V, I = 82.5 mA, T = 25 C, unmatched 50 ohm system, calibrated to device leads) dev cc These represent a single-ended amplifier in the AG606, with there being two matched amplifiers inside the package. Freq (MHz) S11 (dB) S11 (ang) S21 (dB) S21 (ang) S12 (dB) S12 (ang) S22 (dB) S22 (ang) 50 -12.03 178.56 14.61 177.32 -18.85 -0.01 -17.45 178.57 100 -12.09 174.32 14.61 175.28 -18.74 -1.56 -17.08 178.23 150 -11.81 172.20 14.62 173.13 -18.76 -2.21 -17.28 176.63 200 -11.81 169.91 14.59 170.74 -18.81 -3.25 -16.86 176.45 250 -11.64 168.30 14.62 168.67 -18.77 -3.74 -17.24 173.88 300 -11.79 166.47 14.63 165.71 -18.81 -4.12 -17.00 174.14 350 -11.76 164.70 14.68 163.24 -18.79 -4.96 -17.20 172.40 400 -12.02 162.35 14.59 161.23 -18.84 -5.99 -16.85 173.24 450 -11.92 159.27 14.48 158.25 -18.82 -5.99 -17.02 170.87 500 -11.92 156.13 14.53 156.14 -18.80 -6.63 -16.70 169.98 550 -11.77 154.71 14.48 154.05 -18.86 -7.58 -16.78 167.35 600 -11.75 151.64 14.52 151.45 -18.79 -8.02 -16.47 167.79 650 -11.67 150.04 14.45 148.59 -18.74 -9.17 -16.49 164.94 700 -11.89 147.47 14.41 146.59 -18.83 -9.41 -16.48 164.76 750 -11.72 145.07 14.43 144.30 -18.89 -10.48 -16.43 161.86 800 -11.76 143.08 14.33 141.92 -18.87 -11.22 -16.23 161.91 850 -11.56 141.20 14.36 139.40 -18.87 -11.88 -15.86 158.92 900 -11.65 138.97 14.26 137.14 -18.80 -12.23 -15.78 159.88 950 -11.57 137.28 14.28 134.86 -18.79 -13.52 -15.51 156.89 1000 -11.56 135.12 14.19 132.17 -18.86 -13.15 -15.34 156.79 Typical Device Data 50 Z 0 S-Parameters (V = +5.25 V, I = 82.5 mA, T = 25 C, unmatched 37.5 ohm system, calibrated to device leads) dev cc These represent a single-ended amplifier in the AG606, with there being two matched amplifiers inside the package. Freq (MHz) S11 (dB) S11 (ang) S21 (dB) S21 (ang) S12 (dB) S12 (ang) S22 (dB) S22 (ang) 50 -34.66 173.49 14.79 177.27 -18.66 -0.06 -19.98 -0.57 100 -33.64 133.95 14.81 175.12 -18.54 -1.71 -20.40 -3.63 150 -30.17 137.29 14.82 172.89 -18.56 -2.45 -20.15 -4.04 200 -29.21 131.02 14.80 170.45 -18.60 -3.54 -20.91 -7.28 250 -27.90 131.37 14.83 168.30 -18.57 -4.11 -20.34 -5.91 300 -28.12 124.34 14.84 165.33 -18.61 -4.51 -20.82 -9.61 350 -27.59 122.31 14.88 162.80 -18.59 -5.40 -20.57 -10.25 400 -27.52 110.86 14.79 160.77 -18.65 -6.45 -21.33 -14.80 450 -25.69 107.75 14.68 157.66 -18.62 -6.58 -21.31 -13.74 500 -24.49 101.63 14.73 155.45 -18.61 -7.32 -21.94 -15.66 550 -23.76 104.95 14.68 153.27 -18.66 -8.35 -22.13 -13.89 600 -22.84 100.16 14.72 150.61 -18.59 -8.86 -22.79 -18.83 650 -22.46 101.72 14.65 147.66 -18.53 -10.10 -23.13 -17.61 700 -22.06 95.00 14.60 145.62 -18.64 -10.38 -23.54 -19.44 750 -21.15 95.84 14.62 143.20 -18.70 -11.58 -24.06 -16.74 800 -20.79 94.07 14.53 140.77 -18.68 -12.37 -25.05 -20.60 850 -20.09 95.55 14.56 138.11 -18.67 -13.17 -26.61 -16.06 900 -19.78 92.24 14.45 135.83 -18.60 -13.53 -27.43 -23.50 950 -19.42 92.70 14.48 133.44 -18.59 -14.94 -29.28 -17.34 1000 -18.88 90.91 14.39 130.68 -18.66 -14.64 -31.32 -18.82 TriQuint Semiconductor, Inc Phone +1-503-615-9000 FAX: +1-503-615-8900 e-mail: info-sales tqs.com Web site: www.TriQuint.com Page 2 of 5 July 2009