QPC7334TR13 Qorvo

QPC7334 5MHz to 684MHz Variable Equalizer xPON Video Receiver Product Description The QPC7334 is a voltage controlled variable equalizer employing SOI attenuator, optimized for DOCSIS 3.1 operation between 5MHz and 684MHz. 14 pin, 6.0 mm x 6.0 mm x 1.375 mm package Product Features 5 684 MHz Operational Bandwidth 16dB slope range Functional Block Diagram Low insertion loss High linearity 75Ohm impedance for CATV applications 5V single supply voltage Low power consumption Applications CATV amplifier and transmission systems Ordering Information Part No. Description QPC7334SB Sample bag 5 pcs QPC7334SR 7 Reel with 100 pcs QPC7334TR7 7 Reel with 500 pcs QPC7334PCBA-410 Fully assembled Evaluation Board Data Sheet Rev C, October 22, 2021 Subject to change without notice 1 of 14 www.qorvo.com QPC7334 Absolute Maximum Ratings Recommended Operating Conditions Parameter Value/R ang e Parameter Min Typ Max Units Supply Voltage (Vdd) +5 V Supply Voltage (Vdd) -0.5 to +6V Control Voltage (Vc) -0.5 to +6V Junction Temperature +125 C Control Voltage 2 (Vc2) -2 to +24V Operating Temperature -30 +100 C MODE -0.5 to +6V Storage Temperature 40 to 100C Electrical specifications are measured at specified test conditions in RF Input Power +30 dBm application circuit. Specifications are not guaranteed over all recommended operating conditions. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Electrical Specifications Tested in Evaluation Circuit Parameter Conditions (Vdd=5V, T =25C, Z =Z =75) Min Typ Max Units MB S L General Performance Supply Current (Idd) 2.7 mA Thermal Resistance 70 K/W RF Input Power 27 dBm Frequency Range 5 684 MHz Minimum Slope 1 f= 5 to 684MHz 0.4 dB Maximum Slope 1 f= 5 to 684MHz 16 dB RF Performance, slope set between 1dB and 16dB Insertion Loss (S21) f= 684MHz 2 2.2 dB Flatness 2 f= 5 to 684MHz <0.8 1.1 dB Input Return Loss (S11) f= 5 to 684MHz -18 dB Output Return Loss (S22) f= 5 to 20MHz -16 dB Output Return Loss (S22) f= 20 to 684MHz -20 dB P + (IM3 /2) IN dBc Input IP3 50 dBm 6MHz tone spacing at 15dBm/tone P + IM2 , IM2 is F1 + F2 IN dBc Input IP2 80 dBm 6MHz tone spacing at 15dBm/tone Data Sheet Rev C, October 22, 2021 Subject to change without notice 2 of 14 www.qorvo.com