RF3024 RF3024 BROADBAND MEDIUM POWER SPDT SWITCH Package: SC70, 6-Pin Product Description Features The RF3024 is a GaAs pHEMT single-pole double-throw (SPDT) switch 10MHz to 4GHz Operation designed for general purpose switching applications which require very 0.25dB Insertion Loss at low insertion loss, moderate isolation, and medium power handling capa- 1GHz bility. The RF3024 is ideally suited for battery-powered and low control 26dB Isolation at 2GHz voltage applications. 1.8V Minimum Control Voltage 28dBm P0.1dB at 3V Optimum Technology Matching Applied 18dBm P0.1dB at 1.8V GaAs HBT 58dBm IP3 at 3V GaAs MESFET InGaP HBT Applications SiGe BiCMOS Cellular Handset Applications Si BiCMOS SiGe HBT Antenna Tuning Applications GaAs pHEMT IEEE 802.11b/g WiFi Applica- Si CMOS tions Si BJT Cellular Infrastructure Appli- GaN HEMT cations InP HBT RF MEMS LDMOS Specification Parameter Unit Condition Min. Typ. Max. Insertion Loss 0.25 dB 1GHz 0.3 0.4 dB 2GHz 0.45 dB 3GHz VSWR 1.15 1GHz 1.2 2GHz 1.33 3GHz Isolation 26 dB 1GHz 22 26 dB 2GHz 27 dB 3GHz P1dB* 31 dBm 1GHz 32 dBm 2GHz P0.1dB* 28 dBm 1GHz IP3* 60 dBm 1GHz, 1MHz Spacing, 15dBm per tone 58 dBm 2GHz, 1MHz Spacing, 15dBm per tone T , T 40 nS 50% of V to 10/90% of RF ON OFF CTRL T , T 30 nS 10/90% RF RISE FALL Test Conditions: 3.0V, 50, 25C, with Application Circuit shown herein. *Note: Performance degrades below 50MHz.. RF MICRO DEVICES, RFMD, Optimum Technology Matching, Enabling Wireless Connectivity, PowerStar, POLARIS TOTAL RADIO and UltimateBlue are trademarks of RFMD, LLC. BLUETOOTH is a trade- mark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. 2012, RF Micro Devices, Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical DS140916 support, contact RFMD at (+1) 336-678-5570 or customerservice rfmd.com. 1 of 5RF3024 Absolute Maximum Ratings Parameter Rating Unit Caution ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may Control Voltage 7.0 V cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical perfor- mance or functional operation of the device under Absolute Maximum Rating condi- Maximum Input Power +36 dBm tions is not implied. Operating Temperature -40 to +85 C The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. RFM) for its use, nor for any Storage Temperature -65 to +150 C infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of ESD Rating (HBM) Class 1A RFMD. RFMD reserves the right to change component circuitry, recommended appli- cation circuitry and specifications at any time without prior notice. MSL Rating 1 RFMD Green: RoHS compliant per EU Directive 2002/95/EC, halogen free per IEC 61249-2-21, < 1000 ppm each of antimony trioxide in polymeric materials and red phosphorus as a flame retardant, and <2% antimony in solder. Switch Control Settings Control Signals Signal Paths V1 V2 RFC-RF1 RFC-RF2 Valid 1 0 ON OFF States 0 1 OFF ON Invalid 0 0 Indeterminate State* States 1 1 Indeterminate State* 0: Logic level low, 0V ~ 0.2V 1: Logic level high, 1.8V ~ 5.0V *In indeterminate states, both signal paths are in high insertion loss states, ~10dB. Evaluation Board Schematic 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical 2 of 5 support, contact RFMD at (+1) 336-678-5570 or customerservice rfmd.com. DS140916