TQP369184 DC 6 GHz Gain Block Product Description The TQP369184 is a general-purpose buffer amplifier that offers high dynamic range in a low-cost surface-mount package. At 1900MHz, the amplifier typically provides 20.3 dB gain, +28.5 dBm OIP3, and 3.9 dB Noise Figure SOT-363 Package while drawing 45 mA current. The device combines dependable performance with consistent quality to maintain Product Features MTTF values exceeding 100 years at mounting temperatures of +85C. The device is housed in a lead- DC6000 MHz free/green/RoHS-compliant industry-standard SOT-363 Flat, broadband frequency response package. 20.3 dB Gain at 1900 MHz The TQP369184 consists of a Darlington-pair amplifier 3.9 dB Noise Figure at 1900 MHz using the high reliability InGaP/GaAs HBT process +28.5 dBm Output IP3 at 1900 MHz technology. Only DC-blocking capacitors, a bias resistor, +15.5 dBm P1dB at 1900 MHz and an inductive RF choke are required for operation. 50 Ohm Cascadable Gain Block This broadband MMIC amplifier can be directly applied to Single Supply, 45 mA Current various current and next generation wireless technologies SOT-363 Package such as CDMA, W-CDMA, and LTE. In addition, the TQP369184 will work for other applications within the DC to 6 GHz frequency range. Applications Functional Block Diagram Wireless Infrastructure CATV / SATV / MoCA Point to Point Defense & Aerospace Test & Measurement Equipment General Purpose Wireless Ordering Information Part No. Description TQP369184 InGaP/GaAs HBT Gain Block TQP369184-PCB 500-6000 MHz Evaluation Board Standard T/R size = 3000 pieces on a 7 reel Datasheet, June 25, 2020 Subject to change without notice 1 of 10 www.qorvo.com TQP369184 DC 6 GHz Gain Block Absolute Maximum Ratings Recommended Operating Conditions Parameter Rating Parameter Min Typ Max Units Storage Temperature 55 to +150C TCASE 40 +105 C 6 RF Input Power, CW, 50, T=25C +24dBm Tj for >10 hours MTTF +160 C Electrical specifications are measured under bias, signal and temperature Device Voltage (VCC) +4.5 V conditions as specified. Specifications are not guaranteed over all Exceeding any one or a combination of the Absolute Maximum Rating recommended operating conditions. conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Electrical Specifications (1) Parameter Conditions Min Typ Max Units Operational Frequency Range DC 6000 MHz Test Frequency 1900 MHz Gain 18.8 20.3 21.8 dB Input Return Loss 15 dB Output Return Loss 24 dB Output P1dB +15.5 dBm Output IP3 Pout=0 dBm/tone, f= 1 MHz +25.5 +28.5 dBm Noise Figure 3.9 dB Device Voltage, VCC 3.0 3.9 4.5 V Device Current, ICC 45 mA (2) Thermal Resistance, Junction to case 226 C/W jc Notes: 1. Test conditions unless otherwise noted: I =45mA, Temp=+25C, 50 system. CC 2. Thermal path is from the device junction through the package ground tab (pins 2,4) to the backside mounting surface. Datasheet, June 25, 2020 Subject to change without notice 2 of 10 www.qorvo.com