RAFIX 22 FS Contact blocks with quick-connect terminals Contact blocks with quick-connect terminals 2 System RAFI offers contact blocks with quick-connect terminals for the tried and tested RAFIX 22 FS actuators. The contact block snaps into the actuator with a gentle >>>click<<< and is thereby fitted permanently. Concept For those applications where designing a PCB layout is too expensive or not possible at all, a new option has been made available by complementing the series. Catch noses provided on the new contact block snap precisely into the actuator. The screw neck of the actuator is provided with indents safeguarding a reliable union. The contacts of the contact block are easily connected by conventional quick-connect terminals on the rear end. A fin arranged at the centre of the contact block with quick-connect terminals helps to ensure good insulation. It serves as a guide for the additional LED-Clip at the same time if illumination is desired. The new contact blocks with quick-connect terminals makes the RAFIX 22 FS series complete and perfect. Any external control components can be integrated into the system very easily and without needing any tools and you save space, RAFIX effort and material. 22 FS Design Matching all RAFIX 22 FS actuators Panel cut-out to IEC 60947: 22.3 mm with locating indent Ring nut fixing RAFIX 22 FS contact blocks - Quick-connect/solder terminals - 2.8 x 0.8 mm with soldering lugs - Gold / silver contacts Plug-in LED-Clip (24 V) for illuminated actuators 24 NEWRAFIX 22 FS Contact blocks with quick-connect terminals Reliable assembly method 2 29.80 29.80 RAFIX 22 FS Allgemeintoleranzen 2001 Datum Name Drucktaste mittel Bearb. 24.01 Gl ck Mastab: 5:1 Gepr. 24.01 glck Rafix FS Originalformat: A2 FZ FZ 1.30 250.--- Essential features Depth behind panel only 27 mm including LED-Clip Gold contacts for 100% reliable switching of low and cable lugs voltage (min. 5 V / 1 mA) or Quick-connect/solder terminals 2.8 x 0.8 mm Silver contacts (max. 250 V/4 A) for mains voltage The contact block engages permanently with the Contact arrangements: 1 NC, 1 NO, 2 NC, 2 NO, actuator only at the time of final assembly 1 NC + 1 NO Compatible with all RAFIX 22 FS actuators: Illumination with replaceable superbright LED-Clips Pushbuttons, selector switches, keylock switches, emer- in various LED colours, with quick-connect terminals gency stop buttons and signal indicators, with all advan- 2.8 x 0.8 mm tages this series offers: - Large actuating and indicating areas Actuators / contact blocks, signal indicators / lamp - Round or square collar shape sockets and LED-Clips are stocked separately and - Panel cut-out to IEC 60947: 22.3 mm with locating only assembled at final assembly. This ensures indent utmost flexibility and most economic stockkeeping - Degree of protection IP 65 (water-jet proof) for this product range. Protection against contact for quick-connect terminals and cable lugs: Short-circuit proof even when the connection cables are under tensile strain 25 NEW 27.00 9.90 27.00 9.90 25.70 25.70 Modellname: Z1 30250 ---.ASSEM ro/Engineer - 2000i2