Bulletin No. CUB5P-B Drawing No. LP0655 Released 12/07 Tel +1 (717) 767-6511 Fax +1 (717) 764-0839 www.redlion.net MODEL CUB5P - MINIATURE ELECTRONIC 5-DIGIT PROCESS METER z THREE SELECTABLE D.C. RANGES 0 to 10 V, 0(4) to 20 mA, 0 to 50 mA z MINIMUM AND MAXIMUM DISPLAY CAPTURE z LCD, REFLECTIVE OR RED/GREEN LED BACKLIGHTING z 0.48 (12.2 mm) HIGH DIGITS z OPTIONAL SETPOINT OUTPUT MODULES z OPTIONAL SERIAL COMMUNICATIONS MODULES (RS232 or RS485) z OPERATES FROM 9 TO 28 VDC POWER SOURCE z FRONT PANEL OR CRIMSON PROGRAMMABLE z DISPLAY COLOR CHANGE CAPABILITY AT SETPOINT OUTPUT U C R L USUS LISTEDLISTED z NEMA 4X/IP65 SEALED FRONT BEZEL IND. CONT. EQ. 51EB GENERAL DESCRIPTION SAFETY SUMMARY The CUB5 Series provides the user the ultimate in flexibility, from its All safety related regulations, local codes and instructions that appear in this complete user programming to the optional setpoint control and communication literature or on equipment must be observed to ensure personal safety and to capability. The CUB5 accepts a DC voltage or current input signal and provides prevent damage to either the instrument or equipment connected to it. If a display in the desired unit of measure. The meter also features minimum and equipment is used in a manner not specified by the manufacturer, the protection maximum display capture, display offset, units indicator, and programmable provided by the equipment may be impaired. user input. The display can be toggled either manually or automatically between Do not use this meter to directly command motors, valves, or other actuators the selected displays. not equipped with safeguards. To do so can be potentially harmful to persons or The CUB5 display has 0.48 (12.2 mm) high digits. The LCD is available in equipment in the event of a fault to the meter. two versions, reflective or red/green backlight. The backlight version is user selectable for the desired color and also has variable display intensity. The capability of the CUB5 can be easily expanded with the addition of option modules. The setpoint output cards are field installable with programmable setpoints. Serial communications capability for RS232 or RS485 can be added with a serial option module. CAUTION: Risk of Danger. CAUTION: Risk of electric shock. The CUB5 can be powered from an optional Red Lion Micro-Line/Sensor Read complete instructions prior to Power Supply (MLPS1000), which attaches directly to the back of a CUB5. The installationand operation of the unit. MLPS1 is powered from 85 to 250 VAC and provides up to 400 mA to drive the unit and sensors. INPUT The CUB5P is a DC Process meter. It features voltage and current input ranges, that are selected by the user via a programming jumper and software input range selection. The ranges consist of the following: 0 to 10 V, 0(4) to 20 mA, or 0 to 50 mA. Users should select the appropriate voltage range that covers their maximum input. DIMENSIONS In inches (mm) Note: Recommended minimum clearance (behind the panel) for mounting clip installation is 2.15 (54.6) H x 3.00 (76.2) W. 1ORDERING INFORMATION TYPE MODEL NO. DESCRIPTION PART NUMBER Process Meter with reflective display CUB5PR00 CUB5 CUB5P Process Meter with backlight display CUB5PB00 CUB5RLY Single Relay Output Card CUB5RLY0 CUB5SNK Dual Sinking Open Collector Output card CUB5SNK0 Optional Plug-in Cards RS485 Serial Communications Card CUB5COM1 CUB5COM RS232 Serial Communications Card CUB5COM2 MLPS1 Micro-Line Power Supply, 85 to 250 VAC MLPS1000 CBLPROG RS232 Programming Cable (DB9-RJ11) CBLPROG0 Accessories CBPRO RS485 Programming Cable (DB9-RJ11) CBPRO007 * SFCRD Crimson 2 PC Configuration Software for Windows 98, ME, 2000, XP SFCRD200 *Crimson 2 software is a free download from