74FCT38075DCGI Renesas

IDT74FCT38075 3.3V CMOS 1-TO-5 CLOCK DRIVER INDUSTRIAL TEMPERATURE RANGE 3.3V CMOS IDT74FCT38075 1-TO-5 CLOCK DRIVER DESCRIPTION: FEATURES: The FCT38075 is a 3.3V clock driver built using advanced CMOS Advanced CMOS Technology technology. This low skew clock driver offers 1:5 fanout. The large fanout from Guaranteed low skew < 100ps (max.) a single input reduces loading on the preceding driver and provides an efficient Very low duty cycle distortion< 250ps (max.) clock distribution network. Multiple power and grounds reduce noise. Typical High speed propagation delay< 3ns (max.) applications are clock and signal distribution. Very low CMOS power levels TTL compatible inputs and outputs 1:5 fanout Maximum output rise and fall time < 1.5ns (max.) Low input capacitance: 3pF typical VCC = 3.3V 0.3V Inputs can be driven from 3.3V or 5V components Operating frequency up to 166MHz Available in SOIC package FUNCTIONAL BLOCK DIAGRAM PIN CONFIGURATION O1 8 O5 1 O4 7 VCC 2 O3 O2 IN 6 3 O2 IN 5 GND 4 O1 O3 O4 SOIC TOP VIEW O5 INDUSTRIAL TEMPERATURE RANGE JAN. 2012 1 c 2012 Integrated Device Technology, Inc. DSC-6593/6IDT74FCT38075 3.3V CMOS 1-TO-5 CLOCK DRIVER INDUSTRIAL TEMPERATURE RANGE O (1) CAPACITANCE (TA = +25 C, f = 1.0MHz) ABSOLUTE MAXIMUM RATINGS (1) Symbol Description Max Unit Symbol Parameter Conditions Typ. Max. Unit CIN Input Capacitance VIN = 0V 3 4 pF VCC Input Power Supply Voltage 0.5 to +4.6 V VI Input Voltage 0.5 to +5.5 V COUT Output Capacitance VOUT = 0V 6 pF NOTE: VO Output Voltage 0.5 to VCC+0.5 V 1. This parameter is measured at characterization but not tested. TJ Junction Temperature 150 C TSTG Storage Temperature 65 to +165 C NOTE: PIN DESCRIPTION 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause Pin Names Description permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational I N Input sections of this specification is not implied. Exposure to absolute maximum rating O x Outputs conditions for extended periods may affect reliability. POWER SUPPLY CHARACTERISTICS (1) (2) Symbol Parameter Test Conditions Min. Typ. Max. Unit ICCQ Quiescent Power Supply Current VCC = Max. VIN = GND or VCC 0.1 30 A ICC Power Supply Current per Input HIGH VCC = Max. VIN = VCC - 0.6V 45 300 A ICCD Dynamic Power Supply Current VCC = Max. VIN = VCC 80 120 A/MHz (3) per Output CL = 15pF VIN = GND All Outputs Toggling (4) IC Total Power Supply Current VCC = Max. VIN = VCC 90 120 CL = 15pF VIN = GND All Outputs Toggling VIN = VCC 0.6V 90 120 fi = 133MHz VIN = GND mA VCC = Max. VIN = VCC 120 150 CL = 15pF VIN = GND All Outputs Toggling VIN = VCC 0.6V 120 150 fi = 166MHz VIN = GND NOTES: 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC = 3.3V, +25C ambient. 3. This parameter is not directly testable, but is derived for use in Total Power Supply calculations. 4. IC = IQUIESCENT + IINPUTS + IDYNAMIC IC = ICC + ICC DHNT + ICCD (fi) ICC = Quiescent Current ICC = Power Supply Current for a TTL High Input (VIN = VCC -0.6V) DH = Duty Cycle for TTL Inputs High NT = Number of TTL Inputs at DH ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL) fi = Input Frequency 2