DATA SHORT To request the full datasheet, please visit www.intersil.com/products/TW9966 TW9966 FN8605 Rev 2.00 4-Channel Analog Video Decoders and Analog Video Encoder for Automotive November 14, 2016 Applications The TW9966 includes four high quality NTSC/PAL/SECAM Features video decoders that convert analog composite video signal to Accepts all NTSC(M/4.43)/ digital component YCbCr data for automotive applications. PAL(B/D/G/H/I/K/L/M/N/60)/SECAM standards with auto Each channel contains a 10-bit ADC and proprietary clamp and detection gain controllers and utilizes a 4H comb filter for separating luminance and chrominance to reduce cross noise artifacts. Integrated four video analog anti-aliasing filters and 10-bit The TW9966 adopts the image enhancement techniques, CMOS ADCs such as IF compensation filter, CTI and programmable High performance adaptive 4H comb filters for all NTSC/PAL peaking. TW9966 also includes one NTSC/PAL video encoder standards with two 10-bit DACs to support CVBS and YC output. The IF compensation filter for improvement of color TW9966 also includes audio CODEC, which has five audio demodulation analog-to-digital converters and one digital-to-analog converter. A built-in audio controller can generate digital Color Transient Improvement (CTI) outputs for recording/mixing and accepts digital input for Automatic white peak control playback. Programmable hue, saturation, contrast, brightness and sharpness Proprietary fast video locking system for non-real-time application Supports the standard ITU-R BT.656 format or time multiplexed output with 54/108MHz Provides simultaneous four-channel full D1 and CIF time-multiplexed outputs with 54MHz Integrated five audio ADCs and one audio DAC Provides multichannel audio mixed analog output Supports I2S/DSP Master/Slave interface for record output and playback input PCM 8/16 bit and u-Law/A-Law 8-bit for audio word length Programmable audio sample rate that covers popular frequencies of 8/16/32/44.1/48kHz Supports a two-wire serial host interface Integrated one video encoder and two 10-bit video CMOS DACs Integrated clock PLL for 108MHz clock output Ultra low power consumption (typical 666.84mW) AEC-Q100 qualified 128 Ld LQFP package FN8605 Rev 2.00 Page 1 of 2 November 14, 2016TW9966 Copyright Intersil Americas LLC 2014-2016. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. For additional products, see www.intersil.com/en/products.html Intersil Automotive Qualified products are manufactured, assembled and tested utilizing TS16949 quality systems as noted in the quality certifications found at www.intersil.com/en/support/qualandreliability.html Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such modification does not, in Intersil s sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com FN8605 Rev 2.00 Page 2 of 2 November 14, 2016