MIPI D-PHY MIPI SERIALIZER MIPI PROTOCOL CONTROLLER FORMAT CONVERTER AUTOMATIC CONTRAST ADJUSTMENT 4H COMB FILTER DECODER 10-bit ADC AGC ANTI-ALIASING FILTER MUX DATA SHORT To request the full datasheet, please visit www.intersil.com/products/tw9992 TW9992 FN8722 Rev 1.00 Low Power NTSC/PAL Video Decoder with Differential CVBS Inputs and September 1, 2016 MIPI-CSI2 Output Interface The TW9992 is a low power NTSC/PAL analog video decoder Video Processing that is designed for automotive applications. It supports Automatic Contrast Adjustment (ACA) single-ended, differential and pseudo differential composite RGB565 video inputs. Integrated short-to-battery and short-to-ground detection, advanced image enhancement capabilities such as Programmable hue, brightness, saturation, contrast and the programmable Automatic Contrast Adjustment (ACA) and sharpness. the MIPI-CSI2 output interface make the TW9992 an ideal Image enhancement with peaking and CTI solution for demanding automotive camera applications. MIPI Output Features MIPI 1.1 compliant unidirectional output format Analog Video Decoder YUV 422 or RGB565 output format Software selectable analog input control allows for combinations of single-ended CVBS, and differential CVBS Digital Output Built-in analog anti-alias filter Output voltage 1.8V to 3.3V with 3.3V tolerance Two 10-bit ADCs and analog clamping circuit Miscellaneous Fully programmable static gain or automatic gain control for the Y channel Low power consumption: 100mW typical Programmable white peak control for the Y channel Power save and Power-down mode 4-H adaptive comb filter Y/C separation Short-to-battery detection test PAL delay line for color phase error correction Short-to-ground detection test Digital subcarrier PLL for accurate color decoding Two-wire MPU serial bus interface Digital horizontal PLL for synchronization processing and Supports real time control interface pixel sampling Single 27MHz crystal for all operations Advanced synchronization processing and sync detection for Supports 24.54MHz and 29.5MHz crystal for high resolution handling nonstandard and weak signal square pixel format decoding Automatic color control and color killer 3.3V tolerant I/O Chroma IF compensation 1.8V/3.3V power supply VBI slicer supporting industrial standard data services 32 Ld QFN (WQFN with wettable flanks) VBI data passthrough, raw ADC data output TW9992AT-NA1-GE is AEC-Q100 qualified Programmable output cropping YIN0/ YIN1/YIN0- YIN2 / YIN2+ / DIAG0 MIPICLK+ YIN3 / YIN2- MIPICLK- YIN4 / MIPID+ MIPID- YIN5 / YIN4- YIN6 / YIN7 / YIN6- PLL DIAG1 STB/STG DETECTION GP0 DIAG2 GP1 RSTB GP2 PDN SCLK 2 I C REGISTER INTREQ SDAT OSC FILES DETECTION FIGURE 1. TW9992 FUNCTIONAL BLOCK DIAGRAM FN8722 Rev 1.00 Page 1 of 2 September 1, 2016 TW9992 Copyright Intersil Americas LLC 2015-2016. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. For additional products, see www.intersil.com/en/products.html Intersil products are manufactured, assembled and tested utilizing ISO9001 or TS16949 quality systems as applicable noted in the quality certifications found at www.intersil.com/en/support/qualandreliability.html Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such modification does not, in Intersil s sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com FN8722 Rev 1.00 Page 2 of 2 September 1, 2016