APD0810-000 Skyworks

FINAL DATA SHEET APD Series: Silicon PIN Diode Bondable Chips Applications Switches Attenuators Features Established Skyworks PIN diode process Low capacitance designs to 0.05 pF Voltage ratings to 200 V Chip size < 15 mils square Tight control of I layer base width Mesa and planar chip designs Description Skyworks APD series of silicon PIN diodes are designed for use as switch and attenuator devices in high-performance RF and microwave circuits. The PIN diode designs are useful over a wide range of frequencies from below 100 MHz to beyond 30 GHz. These devices use Skyworks well-established silicon technology resulting in PIN diodes with tightly controlled I-region characteristics. The low capacitance and low resistance of the APD0505 through APD1520 diodes are ideal for switch applications that require insertion loss and fast switching speed. For switch or attenuator applications requiring high power and low distortion, the thick I-region and high reverse breakdown voltage of the APD2220 is ideal. The absolute maximum ratings of the APD diode series are provided in Table 1. Electrical specifications are provided in Table 2. Table 3 identifies the die part numbers with their corresponding top contact diameters and die outline drawings. Typical performance characteristics are provided in Figures 1 through 5. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 200075T Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice May 15, 2020 1 FINAL DATA SHEET APD Series: Silicon PIN Diode Bondable Chips Table 1. APD Series Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units MaximumT CaseTemp J Power dissipation PDIS W Thermal Resistance junctiontocase Reverse voltage VR See Voltage Rating column in Table 2 V Forward current IF 200 mA Operating temperature TOP -65 +175 C Storage temperature TSTG -65 +200 C ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. 1 Table 2. APD Series Electrical Specifications (TOP = +25 C, Unless Otherwise Noted) Junction Junction Series Capacitance Capacitance Resistance Minority (CJ) (CJ) (RS), Forward Carrier Thermal VR = 50 V, VR = 0 V, I = 10 mA, Voltage (V ) Lifetime (TL) Voltage I-Region Resistance F 2 1 MHz 1 MHz 500 MHz I = 10 mA I = 10 mA Rating Thickness (JC) F (pF) (pF) () (V) (ns) (V) (m) (C/W) Parameter Maximum Typical Maximum Typical Typical Maximum Nominal Maximum Switching Applications APD0505-000 0.05 0.05 2.5 0.93 70 50 5 118 APD0510-000 0.10 0.10 1.5 0.90 90 50 5 76 APD0520-000 0.20 0.18 1.0 0.88 120 50 5 55 APD0805-000 0.05 0.10 2.0 0.89 100 100 8 87 APD0810-000 0.10 0.15 1.5 0.88 160 100 8 60 APD1505-000 0.06 10 V 0.12 2.5 0.88 350 200 15 60 APD1510-000 0.10 0.20 2.0 0.86 300 200 15 56 APD1520-000 0.20 0.25 1.2 0.84 900 200 15 44 Attenuator Applications APD2220-000 0.20 0.25 4.0 0.79 700 200 50 18 1 Performance is guaranteed only under the conditions listed in this table. 2 Reverse current is specified at 10 A maximum at the voltage rating noted. Do not exceed this voltage. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 200075T Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice May 15, 2020 2