LXA-U1U SSA

Rail mounted LXA - U1U analog isolator Jumper selected input and output signal. 3 years warranty Input 4...20 mA with current loop supply. Galvanic separation input/output/supply. Signal conversion between input and output. High reliability and accuracy. Detachable, fast and reliable wire connectors. Slim, rail and fast click mounted housing. Special versions on request. The LXA-U1U universal analog isolator is dedicated for separation the analog input signal from the output line. A device assures full 3 ways galvanic separation between input, output and supply lines. Front jumpers allow for easy and comfortable setting the input and output signal. User may to choose one of the current signal (0...5 mA, 0...20 mA, 4...20 mA) or voltage (0...10V). For 4...20 mA input it is possible to supply the input current loop. Front jumpers are covered by transparent protection cover. There is possibility to deliver device for non-standard signals on demand. 24VDC 17,5 120 Input and output are programmable via DIP switches located on the front panel. INPUT OUTPUT ON ON 1 ON OFF 0 3 7 12 4 56 8 12 3 4 0 1 0 0 1 0 0 0 0...10V 0...10V 1 0 0 1 0 1 0 0 1 0 0 1 0...20mA 0...20mA 00 0 0 0 1 0 1 1 0 1 0 4...20mA 4...20mA 0 11 0 4...20mA (2W) 1 0 0 1 0 0 1 0 It is recomended to set input and output before installation. 0 1 0 0 1 1 0 0 0...5mA Order LXA-U1U using the following code: LXA - U1U AUTOMATION AND INDUSTRIAL ELECTRONIC Input input span (jumper selected) 0...5mA, 0...20mA, 4...20mA, 0...10V, 4...20mA with current loop supply input resistance - current input 100 - voltage input 500k input current loop supply 18...22V DC / 20...0mA overload 200% input span Output output signal (jumper selected) 0...20mA, 4...20mA, 0...10V load resistance - current output 500 - voltage output 1k load variation influeance 0.05% Dane oglne basic accuracy 0.2% response time (10..90%) 0.2s galvanic separation (test) 1.5kV AC, 50Hz, 1min warm up time 15min Power supply supply voltage - nominal 24V DC - supply voltage range 20...30V DC supply current 90mA supply voltage variation influence 0.05% Temperature operating temperature 0...70C temperature influence 0.01%/C Environment conditions storage temperature -20...85C humidity (non-condensing) 90% working position vertical Housing material molded PC/ABS protection housing/terminals IP20/IP20 2 wire connections plugs with screw terminals 1.5 mm dimensions see drawings on the first page weight ~ 110g AUTOMATION AND INDUSTRIAL ELECTRONIC