STM32MP157A-DK1 STM32MP157C-DK2 Data brief Discovery kits with STM32MP157 MPUs Features Common features STM32MP157 Arm -based dual Cortex -A7 32 bits + Cortex -M4 32 bits MPU in TFBGA361 package ST PMIC STPMIC1 4-Gbit DDR3L, 16 bits, 533 MHz 1-Gbps Ethernet (RGMII) compliant with IEEE-802.3ab USB OTG HS Audio codec 4 user LEDs 2 user and reset push-buttons, 1 wake-up button 5 V / 3 A USB Type-C power supply input (not provided) Board connectors: Ethernet RJ45 4 USB Host Type-A USB Type-C DRP SM MIPI DSI HDMI STM32MP157C-DK2 top view with Stereo headset jack including analog microphone input display removed. Picture is not contractual. microSD card GPIO expansion connector (Raspberry Pi shields capability) Product status link ARDUINO Uno V3 expansion connectors STM32MP157A-DK1 On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration STM32MP157C-DK2 capability: Virtual COM port and debug port STM32CubeMP1 and full mainline open-source Linux STM32 MPU OpenSTLinux Distribution (such as STM32MP1Starter) software and examples Support of a wide choice of Integrated Development Environments (IDEs) including IAR , Keil , GCC-based IDEs Board-specific features SM 4 TFT 480800 pixels with LED backlight, MIPI DSI interface, and capacitive touch panel WiFi 802.11b/g/n Bluetooth Low Energy 4.1 Description The STM32MP157A-DK1 and STM32MP157C-DK2 Discovery kits leverage the capabilities of STM32MP1 Series microprocessors to allow users easily develop applications using STM32 MPU OpenSTLinux Distribution software for the main processor and STM32CubeMP1 software for the co-processor. DB3801 - Rev 2 - August 2019 www.st.com For further information contact your local STMicroelectronics sales office.STM32MP157A-DK1 STM32MP157C-DK2 They include an ST-LINK embedded debug tool, LEDs, push-buttons, one Ethernet 1-Gbps connector, one USB Type-C OTG connector, four USB Type-A Host connectors, one HDMI transceiver, one stereo headset jack with analog microphone, and one microSD connector. To expand the functionality of the STM32MP157A-DK1 and STM32MP157C-DK2 Discovery kits, two GPIO expansion connectors are also available for ARDUINO and Raspberry Pi shields. Additionally, the STM32MP157C-DK2 Discovery kit features an LCD display with a touch panel, and WiFi and Bluetooth Low Energy capability. DB3801 - Rev 2 page 2/7