STPSC20H12C 1200 V power Schottky silicon carbide diode Datasheet - production data Description A1 The SiC diode, available in TO-247 LL, is an K ultrahigh performance power Schottky rectifier. It A2 is manufactured using a silicon carbide substrate. The wide band-gap material allows the design of a low VF Schottky diode structure with a 1200 V rating. Due to the Schottky construction, no recovery is shown at turn-off and ringing patterns are negligible. The minimal capacitive turn-off behavior is independent of temperature. Especially suited for use in PFC and secondary side applications, this ST SiC diode will boost the performance in hard switching conditions. This A2 rectifier will enhance the performance of the K targeted application. Its high forward surge A1 TO-247 LL capability ensures a good robustness during transient phases. Table 1: Device summary Features Symbol Value No or negligible reverse recovery IF(AV) 2 x 10 A Switching behavior independent of temperature V 1200 V RRM Robust high voltage periphery Tj (max.) 175 C Operating Tj from -40 C to 175 C VF (typ.) 1.35 V ECOPACK 2 compliant February 2017 DocID030344 Rev 1 1/10 www.st.com This is information on a product in full production. Characteristics STPSC20H12C 1 Characteristics Table 2: Absolute ratings (limiting values per diode at 25 C, unless otherwise specified) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage (Tj = -40 C to +175 C) 1200 V I Forward rms current 25 A F(RMS) TC = 150 C, DC current 10/20 Average forward Per diode/per I TC = 135 C, DC current 14/28 A F(AV) device current TC = 25 C, DC current 25/50 Repetitive peak I T = 150 C, T = 175 C, = 0.1 42 A FRM C j forward current T = 25 C 71 C t = 10 ms sinusoidal p Surge non repetitive IFSM TC = 150 C 60 A forward current t = 10 s square T = 25 C 420 p C Tstg Storage temperature range -65 to +175 C T Operating junction temperature range -40 to +175 C j Table 3: Thermal resistance parameters Symbol Parameter Typ. value Max. value Unit Per diode 0.70 0.95 Junction to case Rth(j-c) C/W Per device 0.35 0.48 Table 4: Static electrical characteristics (per diode) Symbol Parameter Test conditions Min. Typ. Max. Unit Tj = 25 C - 5 60 (1) IR Reverse leakage current VR = VRRM A T = 150 C - 30 400 j Tj = 25 C - 1.35 1.50 (2) VF Forward voltage drop IF = 10 A V T = 150 C - 1.75 2.25 j Notes: (1) Pulse test: tp = 10 ms, < 2% (2) Pulse test: tp = 500 s, < 2% To evaluate the conduction losses, use the following equation: 2 P = 1.03 x I + 0.122 x I F(AV) F (RMS) 2/10 DocID030344 Rev 1