DF6D5M4N ESD Protection Diodes Silicon Epitaxial Planar DF6D5M4NDF6D5M4NDF6D5M4NDF6D5M4N 1. 1. GeneralGeneral 1. 1. GeneralGeneral The DF6D5M4N is a TVS diode (ESD protection diode) protects semiconductor devices used in mobile device interfaces and other applications to protect against static electricity and noise. Utilizing snapback characteristics, the DF6D5M4N provides low dynamic resistance and superior protective performance. Furthermore, the DF6D5M4N is a multibit device with a flow-through type design that is easy for board layout and mounting. 2. 2. 2. 2. ApplicationsApplicationsApplicationsApplications Mobile Equipment Smartphones Tablets Notebook PCs Desktop PCs Note: This product is designed for protection against electrostatic discharge (ESD) and is not intended for any other purpose, including, but not limited to, voltage regulation. 3. 3. FeaturesFeatures 3. 3. FeaturesFeatures (1) Suitable for use with a 3.3 V signal line. (V 3.6 V) RWM (2) Protects devices with its high ESD performance. (V = 20 kV (Contact / Air) IEC61000-4-2) ESD (3) Low dynamic resistance protects semiconductor devices from static electricity and noise. (R = 0.8 (typ.)) DYN (4) Snapback characteristics realizing low clamping voltage protects semiconductor devices. (V = 10 V I = 2 A (typ.)) C PP (5) The DF6D5M4N is a multibit device with a flow-through type. (1.25 mm 1.0 mm size (Nickname: DFN6)) 4. 4. 4. 4. PackagingPackagingPackagingPackaging DFN6 Start of commercial production 2017-02 2016-2018 2018-02-02 1 Toshiba Electronic Devices & Storage Corporation Rev.2.0DF6D5M4N 5. 5. 5. 5. Example of Circuit DiagramExample of Circuit DiagramExample of Circuit DiagramExample of Circuit Diagram 6. 6. Quick Reference DataQuick Reference Data 6. 6. Quick Reference DataQuick Reference Data Characteristics Symbol Note Test Condition Min Typ. Max Unit Working peak reverse voltage V (Note 1) 3.6 V RWM Total capacitance C V = 0 V, f = 1 MHz 0.2 0.3 pF t R Dynamic resistance R (Note 2) 0.8 DYN Electrostatic discharge voltage V (Note 3) 20 kV ESD (IEC61000-4-2) (Contact) Note 1: Recommended operating condition. Note 2: TLP parameters: Z0 = 50 , tp = 100 ns, tr = 300 ps, averaging window: t1 = 30 ns to t2 = 60 ns, extraction of dynamic resistance using least squares fit of TLP characteristics between I = 8 A and I = 16 A. PP1 PP2 Note 3: Criterion: No damage to devices. 2016-2018 2018-02-02 2 Toshiba Electronic Devices & Storage Corporation Rev.2.0