TLP151A(TPR,E) Toshiba

TLP151A Photocouplers GaAAs Infrared LED & Photo IC TLP151ATLP151ATLP151ATLP151A 1. 1. ApplicationsApplications 1. 1. ApplicationsApplications Transistor Inverters MOSFET Gate Drivers IGBT Gate Drivers 2. 2. 2. 2. GeneralGeneralGeneralGeneral The TLP151A is a photocoupler in a SO6 package that consists of a GaAAs infrared light-emitting diode (LED) optically coupled to an integrated high-gain, high-speed photodetector IC chip. The photodetector has an internal Faraday shield that provides a guaranteed common-mode transient immunity. TLP151A is suitable for direct gate driving circuit for small capacity IGBTs or power MOSFETs. 3. 3. FeaturesFeatures 3. 3. FeaturesFeatures (1) Buffer logic type (Totem pole output) (2) Package type: SO6 (3) Output peak current: 0.6 A (max) (4) Operating temperature: -40 to 110 (5) Supply voltage: 10 to 30 V (6) Threshold input current: 5.0 mA(max) (7) Propagation delay time: 500 ns (max) (8) Common-mode transient immunity: 20 kV/s (min) (9) Isolation voltage: 3750 Vrms (min) (10) Safety standards UL-approved: UL1577, File No.E67349 cUL-approved: CSA Component Acceptance Service No.5A File No.E67349 (Note 1) VDE-approved: EN60747-5-5 (Note 1)(Note 1)(Note 1) Option (V4) Note 1: When an EN60747-5-5 approved type is needed, please designate the Option (V4)Option (V4)Option (V4). 4. 4. 4. 4. Packaging and Pin AssignmentPackaging and Pin AssignmentPackaging and Pin AssignmentPackaging and Pin Assignment 1: Anode 3: Cathode 4: GND 5: V (Output) O 6: V CC 11-4L1S Start of commercial production 2011-05 2015 Toshiba Corporation 2017-06-09 1 Rev.4.0TLP151A 5. 5. 5. 5. Internal Circuit (Note)Internal Circuit (Note)Internal Circuit (Note)Internal Circuit (Note) Fig. Fig. Fig. Fig. 5.15.15.15.1 Internal CircuitInternal CircuitInternal CircuitInternal Circuit Note: A 0.1-F bypass capacitor must be connected between pin 6 and pin 4. 6. 6. 6. 6. Principle of OperationPrinciple of OperationPrinciple of OperationPrinciple of Operation 6.1. Truth Table 6.1. 6.1. 6.1. Truth TableTruth TableTruth Table Input LED M1 M2 Output H ON ON OFF H L OFF OFF ON L 6.2. 6.2. 6.2. 6.2. Mechanical ParametersMechanical ParametersMechanical ParametersMechanical Parameters Characteristics Min Unit Creepage distances 5.0 mm Clearance distances 5.0 Internal isolation thickness 0.4 2015 Toshiba Corporation 2017-06-09 2 Rev.4.0