TLP160J TOSHIBA Photocoupler GaAs Ired & PhotoTriac TLP160J Triac Drive Unit: mm Programmable Controllers ACOutput Module Solid State Relay The TOSHIBA mini flat coupler TLP160J is a small outline coupler, suitable for surface mount assembly. The TLP160J consists of a photo triac, optically coupled to a gallium arsenide infrared emitting diode. Peak offstate voltage: 600 V (min) Trigger LED current: 10 mA (max) On state current: 70 mA (max) Isolation voltage: 2500 Vrms (min) UL recognized: UL1577, file No. E67349 TOSHIBA 114C3 Trigger LED Current Weight: 0.09 g (typ.) Trigger LED Current (mA) Marking of V =6V, Ta=25C Classification* T Classification Pin Configurations Min Max (IFT7) 7 T7 Standard 10 T7, blank 6 1 *Ex. (IFT7) TLP160J (IFT7) (Note) Application type name for certification test, please use standard product type name, i.e. 4 3 TLP160J(IFT7): TLP160J 1. Anode 3. Cathode 4. Terminal 1 6. Terminal 2 Start of commercial production 1988/04 1 2014-09-01 TLP160J Absolute Maximum Ratings (Ta = 25C) Characteristic Symbol Rating Unit Forward current I 50 mA F Forward current derating (Ta 53C) I / C 0.7 mA / C F Peak forward current (100 s pulse, 100 pps) I 1 A FP Reverse voltage V 5 V R Junction temperature T 125 C j Offstate output terminal voltage V 600 V DRM Ta=25C 70 Onstate RMS current I mA T(RMS) Ta=70C 40 Onstate current derating (Ta 25C) I / C 0.67 mA / C T Peak onstate current (100 s pulse, 120pps) I 2 A TP Peak nonrepetitive surge current I 1.2 A TSM (P =10ms) W Junction temperature T 115 C j Storage temperature range T 55 to 125 C stg Operating temperature range T 40 to 100 C opr Lead soldering temperature (10 s) T 260 C sol Isolation voltage (AC, 1 minute, R.H. 60%) (Note) BV 2500 Vrms S Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc.). (Note) Device considered a two terminal device: Pins 1 and 3 shorted together and pins 4 and 6 shorted together. Recommended Operating Conditions Characteristic Symbol MinTyp.MaxUnit Supply voltage V 240 Vac AC Forward current I 15 20 25 mA F Peak onstate current I 1 A TP Operating temperature T 25 85 C opr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2 2014-09-01 Detector LED