TLP2105(F) Toshiba

TLP2105 Photocouplers Infrared LED & Photo IC TLP2105TLP2105TLP2105TLP2105 1. 1. ApplicationsApplications 1. 1. ApplicationsApplications Programmable Logic Controllers (PLCs) Battery Management System (BMS) Industrial Inverters 2. 2. 2. 2. GeneralGeneralGeneralGeneral The Toshiba TLP2105 consists of high-output an infrared LED coupled with a high-gain, high-speed photo detector. It has two circuits built into a single SO8 package, which can reduce the mounting area. The detector has a totem-pole output stage with current sourcing and sinking capabilities. TLP2105 has an internal Faraday shield that provides a guaranteed common-mode transient immunity of 10 kV/s. The TLP2105 has a buffer output. An inverter output version, the TLP2108, is also available. 3. 3. FeaturesFeatures 3. 3. FeaturesFeatures (1) Buffer logic type (totem pole output) (2) Supply voltage: 4.5 to 20 V (3) Threshold input current: 1.6 mA (max) (4) Propagation delay time (tpLH/tpHL): 250 ns (max) (5) Common-mode transient immunity: 10 kV/s (min) (6) Operating temperature range: -40 to 100 (7) Isolation voltage: 2500 Vrms (min) (8) Safety standards UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 (Note 1) VDE-approved: EN 60747-5-5 (Note 1)(Note 1)(Note 1) Option (V4) Note 1: When a VDE approved type is needed, please designate the Option (V4)Option (V4)Option (V4). Start of commercial production 2008-07 2016-2019 2019-11-19 1 Toshiba Electronic Devices & Storage Corporation Rev.2.0TLP2105 4. 4. 4. 4. Packaging and Pin AssignmentPackaging and Pin AssignmentPackaging and Pin AssignmentPackaging and Pin Assignment 1: Anode 1 2: Cathode 1 3: Cathode 2 4: Anode 2 5: GND 6: V 2 (Output 2) O 7: V 1 (Output 1) O 8: V CC 11-5K1S 5. 5. 5. 5. Internal Circuit (Note)Internal Circuit (Note)Internal Circuit (Note)Internal Circuit (Note) Note: A 0.1-F bypass capacitor must be connected between pin 8 and pin 5. 6. 6. 6. 6. Principle of OperationPrinciple of OperationPrinciple of OperationPrinciple of Operation 6.1. 6.1. Truth TableTruth Table 6.1. 6.1. Truth TableTruth Table Output1 Input LED1(2) Tr1(3) Tr2(4) (2) H ON ON OFF H L OFF OFF ON L 6.2. Mechanical Parameters 6.2. 6.2. 6.2. Mechanical ParametersMechanical ParametersMechanical Parameters Characteristics Dimension(Min) Unit Creepage distances 4.2 mm Clearance distances 4.2 Internal isolation thickness 2016-2019 2019-11-19 2 Toshiba Electronic Devices & Storage Corporation Rev.2.0