TLP2962F Toshiba

TLP2962F Photocouplers GaAAs Infrared LED & Photo IC TLP2962FTLP2962FTLP2962FTLP2962F 1. 1. ApplicationsApplications 1. 1. ApplicationsApplications Factory Automation (FA) High-Speed Digital Interfacing Measuring Instruments 2. 2. 2. 2. GeneralGeneralGeneralGeneral The Toshiba TLP2962F consists of a high-output GaAAs light-emitting diode coupled with integrated high gain, high-speed photodetectors. The TLP2962F guarantees operation at up to 125 and on supplies from 2.7 V to 5.5 V. It is housed in the DIP8 package. The TLP2962F has an internal Faraday shield that provides a guaranteed common-mode transient immunity of 20 kV/s. The TLP2962F satisfies 8 mm PC board spacing requirements. Absolute maximum ratings and electrical characteristics are the same as in the TLP2962. 3. 3. FeaturesFeatures 3. 3. FeaturesFeatures (1) Inverter logic type (open collector output) (2) Package: DIP8 (3) Operating temperature: -40 to 125 (4) Supply voltage: 2.7 to 5.5 V (5) Data transfer rate: 15 MBd (typ.) (NRZ) (6) Threshold input current: 5.0 mA (max) (7) Supply current: 4 mA (max) (8) Common-mode transient immunity: 20 kV/s (min) (9) Isolation voltage: 5000 Vrms (min) (10) Safety standards UL-approved: UL1577, File No.E67349 cUL-approved: CSA Component Acceptance Service No.5A File No.E67349 (Note 1) VDE-approved: EN60747-5-5, EN60065 or EN60950-1 (Note 1)(Note 1)(Note 1) Option (D4) Note 1: When an EN60747-5-5 approved type is needed, please designate the Option (D4)Option (D4)Option (D4). Start of commercial production 2011-09 2015 Toshiba Corporation 2015-12-16 1 Rev.3.0TLP2962F 4. 4. 4. 4. Packaging and Pin ConfigurationPackaging and Pin ConfigurationPackaging and Pin ConfigurationPackaging and Pin Configuration 1: N.C. 2: Anode 3: Cathode 4: N.C. 5: GND 6: V (Output) O 7: N.C. 8: V CC 11-10C402S 5. 5. Internal CircuitInternal Circuit 5. 5. Internal CircuitInternal Circuit 6. 6. 6. 6. Principle of OperationPrinciple of OperationPrinciple of OperationPrinciple of Operation 6.1. 6.1. 6.1. 6.1. Truth TableTruth TableTruth TableTruth Table Input LED Output H ON L L OFF H 6.2. 6.2. 6.2. 6.2. Mechanical ParametersMechanical ParametersMechanical ParametersMechanical Parameters 10.16-mm Pitch Characteristics Unit TLP2962F Creepage distances 8.0 (min) mm Clearance distances 8.0 (min) Internal isolation thickness 0.4 (min) 2015 Toshiba Corporation 2015-12-16 2 Rev.3.0