TLP3412R Photocouplers Photorelay TLP3412RTLP3412RTLP3412RTLP3412R 1. 1. ApplicationsApplications 1. 1. ApplicationsApplications Battery Control and Monitoring Measuring Instruments High-Speed Logic IC Testers High-Speed Memory Testers 2. 2. 2. 2. GeneralGeneralGeneralGeneral The TOSHIBA TLP3412R is a very small outline non-leaded photorelay suitable for surface-mount assembly. It is housed in a VSONR4 package.TLP3412R has a Built-in input resistor, which eliminates an external input resistor for space saving. Its features include low off-state current and low output pin capacitance. 3. 3. FeaturesFeatures 3. 3. FeaturesFeatures (1) VSONR4: 2.8 (L) mm 1.5 (W) mm 1.3 (H) mm (2) Normally opened (1-Form-A) (3) OFF-state output terminal voltage: 60 V (min) (4) Operate voltage : 3 V (max) (5) ON-state current: 400 mA (max) (6) ON-state resistance: 1 (typ.), 1.5 (max) (7) Isolation voltage: 500 Vrms (min) 4. 4. 4. 4. Packaging and Pin AssignmentPackaging and Pin AssignmentPackaging and Pin AssignmentPackaging and Pin Assignment 1: Anode 2: Cathode 3: Drain 4: Drain 11-3D1 5. 5. Internal CircuitInternal Circuit 5. 5. Internal CircuitInternal Circuit Start of commercial production 2014-04 2016-2020 2020-02-19 1 Toshiba Electronic Devices & Storage Corporation Rev.7.0TLP3412R 6. 6. 6. 6. Absolute Maximum Ratings (Note) (Unless otherwise specified, TAbsolute Maximum Ratings (Note) (Unless otherwise specified, TAbsolute Maximum Ratings (Note) (Unless otherwise specified, TAbsolute Maximum Ratings (Note) (Unless otherwise specified, T = 25 = 25 = 25 = 25 )))) aaaa Characteristics Symbol Note Rating Unit LED Applied input forward voltage V 6 V IN Input reverse voltage V 5 R Junction temperature T 125 j Detector OFF-state output terminal voltage V 60 V OFF ON-state current I 400 mA ON ON-state current derating (T 25 ) I /T -4 mA/ a ON a ON-state current (pulsed) (t = 100 ms, Duty = 1/10) I 1200 mA ONP Junction temperature T 125 j Common Storage temperature T -40 to 125 stg Operating temperature T -40 to 110 opr Lead soldering temperature (10 s) T 260 sol Isolation voltage AC, 60 s, R.H. 60 % BV (Note 1) 500 Vrms S Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook Handling PrecautionDerating Concept and Method) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: This device is considered as a two-terminal device: Pins 1 and 2 are shorted together, and pins 3 and 4 are shorted together. Note: This device is sensitive to electrostatic discharge (ESD). Extreme ESD conditions should be guarded against by using proper antistatic precautions for the worktable, operator, solder iron, soldering equipment and so on. 7. 7. Recommended Operating Conditions (Note)Recommended Operating Conditions (Note) 7. 7. Recommended Operating Conditions (Note)Recommended Operating Conditions (Note) Characteristics Symbol Note Min Typ. Max Unit Supply voltage V 48 V DD Applied input forward voltage V 3 3.3 6 V IN ON-state current I 400 mA ON Operating temperature T -20 85 opr Note: The recommended operating conditions are given as a design guide necessary to obtain the intended performance of the device. Each parameter is an independent value. When creating a system design using this device, the electrical characteristics specified in this data sheet should also be considered. 2016-2020 2020-02-19 2 Toshiba Electronic Devices & Storage Corporation Rev.7.0