TLP3475SRHA Photocouplers Photorelay TLP3475SRHA 1. Applications (Note) ATE (Automatic Test Equipment) Probe Cards Measuring Instruments High-Speed Logic IC Testers High-Speed Memory Testers 2. General The TOSHIBA TLP3475SRHA is a very small outline non-leaded photorelay suitable for surface-mount assembly. It is housed in a S-VSON4T package. TLP3475SRHA has a Built-in input resistor, which eliminates an external input resistor for space saving. Its features include low off-state current and low output pin capacitance. 3. Features (1) S-VSON4T: 2.0 (L) mm 1.45 (W) mm 1.3 (H) mm (2) Operating temperature: -40 to 125 (3) Normally opened (1-Form-A) (4) OFF-state output terminal voltage: 60 V (min) (5) Operating voltage: 3 V (max) (6) ON-state current: 400 mA (max) (7) Output capacitance: 12 pF (typ.) ,20 pF (max) (8) ON-state resistance: 1 (typ.), 1.5 (max) (9) Isolation voltage: 500 Vrms (min) (10) Halogen-free For details, seeDevices in Halogen-Free Resin Package at the end of this datasheet. 4. Packaging and Pin Assignment 1: Anode 2: Cathode 3: Drain 4: Drain 11-2E2 Start of commercial production 2020-06 2020-2021 2021-07-16 1 Toshiba Electronic Devices & Storage Corporation Rev.2.0TLP3475SRHA 5. Internal Circuit 6. Absolute Maximum Ratings (Note) (Unless otherwise specified, T = 25 ) a Characteristics Symbol Note Rating Unit LED Applied input forward voltage V 6 V IN Input reverse voltage V 6 R Input power dissipation P 50 mW D Input power dissipation derating (T 25 ) P /T -0.45 mW/ a D a Junction temperature T 135 j Detector OFF-state output terminal voltage V 60 V OFF ON-state current I 400 mA ON ON-state current derating (T 25 ) I /T -3.6 mA/ a ON a ON-state current (pulsed) (t = 100 ms, Duty = 1/10) I 1200 mA ONP Output power dissipation P 240 mW O Output power dissipation derating (T 25 ) P /T -2.2 mW/ a O a Junction temperature T 135 j Common Storage temperature T -40 to 135 stg Operating temperature T -40 to 125 opr Lead soldering temperature (10 s) T 260 sol Isolation voltage AC, 60 s, R.H. 60 % BV (Note 1) 500 Vrms S Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook Handling PrecautionDerating Concept and Method) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: This device is considered as a two-terminal device: Pins 1 and 2 are shorted together, and pins 3 and 4 are shorted together. Note: This device is sensitive to electrostatic discharge (ESD). Extreme ESD conditions should be guarded against by using proper antistatic precautions for the worktable, operator, solder iron, soldering equipment and so on. 7. Recommended Operating Conditions (Note) Characteristics Symbol Note Min Typ. Max Unit Supply voltage V 48 V DD Applied input forward voltage V 3.3 6 V IN ON-state current I 400 mA ON Operating temperature T -40 125 opr Note: The recommended operating conditions are given as a design guide necessary to obtain the intended performance of the device. Each parameter is an independent value. When creating a system design using this device, the electrical characteristics specified in this data sheet should also be considered. 2020-2021 2021-07-16 2 Toshiba Electronic Devices & Storage Corporation Rev.2.0