TLX9300 TOSHIBA Photocoupler IRLED & Photo-Transistor TLX9300 Various Controllers Unit: mm Signal transmission between different circuit potential HEV (Hybrid Electric Vehicle) and EV (Electric Vehicle) Applications The TOSHIBA TLX9300 mini-flat photocoupler is suitable for surface-mount assembly. The TLX9300 consists of an infrared LED optically coupled to a photo-transistor. This photocoupler can be used to the extensive applications. It is generic speed transistor output. Collector-emitter voltage: 40 V (min) Current transfer ratio: 100% (min) to 900%(max) Isolation voltage: 3750 Vrms (min) AEC-Q101 qualified Pin Configuration JEDEC JEITA TOSHIBA 11-4M1S 1 6 Weight: 0.08 g (typ.) 3 4 R BE 1: Anode 3: Cathode 4: Emitter 6: Collector 2019 1 2019-06-28 Toshiba Electronic Devices & Storage Corporation TLX9300 Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25C) Characteristic Symbol Rating Unit Forward current I 30 mA F Forward current (Ta=125 C) I 18 mA F Forward current derating(Ta 108 C) IF/C -0.7 mA/C Pulse forward current (Note 1) I 1 A FP Input Power Dissipation PD 50 mW Input Power Dissipation Derating (Ta 50C) PD/C -0.5 mW/C Reverse voltage VR 5 V Collector-emitter voltage V 40 V CEO Emitter-collector voltage V 5 V ECO Collector current I 50 mA C Collector power dissipation PC 150 mW Collector power dissipation derating (Ta 50 C) P /C -1.5 mW/C C Operating temperature range T -40 to 125 C opr Storage temperature range T -55 to 150 C stg Lead soldering temperature(10 s) Tsol 260 C Total package power dissipation P 200 mW T Total package power dissipation derating (Ta 50C) P /C -2.0 mW/C T Isolation voltage (AC, 60 s, R.H. 60 %) (Note 2) BV 3750 Vrms S Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Pulse width PW 100s, f = 100 Hz Note 2: This device is considered as a two terminal device: Pins 1 and 3 are shorted together, and pins 4 and 6 are shorted together. Recommended Operating Conditions (Note) Characteristic Symbol Min Typ. Max Unit Supply voltage V 5 24 V CC Forward current I 10 15 mA F Collector current I 1 10 mA C Operating temperature T -40 125 C opr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2019 2 2019-06-28 Toshiba Electronic Devices & Storage Corporation Detector LED