A. To fit UK European CEE (7) VII Schuko sockets as used in Belgium, France, Germany, Holland, Spain. B. The Vermason Earth Bonding Point (EBP) plug is designed to provide a safe effective and easy to use earthing point in an ESD protected area (EPA). The plug fits into the mains supply socket, making a connection with the earth conductor only. In place of the live and neutral pins are moulded insulating plastic pins to allow positive location in the socket. Connectors on the front of the plug are available for connection via ground cords to the various elements of the EPA. Thus each element is held at a common potential. C. The normal earth contact is linked via individual 1 M resistor rated at 1/2W. In the event of a workstation element becoming live the resistor will limit the fault current to less than 0.3mA at 240V, and is capable of withstanding 500VDC for 6 minutes. D. If overstressed the resistor will open the circuit. E. It is virtually impossible to misuse the plug, which is permanently sealed. The resistance between the terminations and the pin of each plug is tested after manufacture. Property Value F. Check that the connectors on the plug face correspond with the terminations on the wrist strap and ground cords: several variations of the plug are available. Insert the EBP plug into a Colour Yellow mains supply socket and push it fully home. The plug functions safely whether the socket is switched off or on. Connect the elements of the EPA such as bench and floor mats to the EBP Size of plug casing 63 x 49 x 49mm plug face using ground cords. Weight 36g G. The plug is ONLY to be used for ESD control purposes. Connector to earth pin resistance 0.95 - 1.05M H. ONLY use ground cords with compatible connections to those on plug. Vermason supply EBP plugs with terminations for all standard ground cords. approx 2M Connector to connector resistance I. NOT to be used for earthing electrical appliances J. DO NOT open or try to repair. Test the plug by measuring the resistance from each termination to the Earth pin. Resistance should be between 0.9 and 1.1M. Item Description K. Each termination is connected to its own 1M resistor. The resistance between two 231135 European Plug with 3 x 10mm Studs terminations should be approximately 2M 231125 European Plug with 1 x 4mm Studs, 2 x 10mm Studs L. To avoid the need for unduly long ground cords and to simplify the daily visual check, that all connections are sound and in place, an EBP plug should not be shared by more than two European Plug with 2 x 4mm Plug Sockets, work stations. 231170 1 x 10mm Stud M. The EBP plug may also be used in conjunction with a Vermason EBP box or bar installed at the front of a bench for easier connecting of wrist straps for example. N. EBP plugs are packed and labelled individually in an antistatic polyethylene bag. Made in Britain European Earth Bonding Plugs VERMASON LTD. Drawing Number DATE: 1 AVENUE ONE, LETCHWORTH, HERTS, SG6 2HB UK PHONE: +44 (0) 1462-672005, FAX: +44 (0) 1462-670440 231135 May 2007 E-MAIL:Service Vermason.co.uk, INTERNET: Vermason.co.uk 2007 VERMASON LTD.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for vermason manufacturer: Other Similar products are found below : 203015 237670 230260 238711 35594 230660 072425B 50424 242296 229775 J6609 VER-29082 47200 231725 231250 242270 47201 230480 203065 237200 229100 249205 230310 229795 230647 230370 231275 237675 231280 35267 242278 231345 35595 229135 230646 VER-26457 230420 35592 35622 241030 241100 ASBB4