VBUS054DD-HF4-GS08 Vishay

VBUS054DD-HF4 www.vishay.com Vishay Semiconductors 4-Line BUS-Port ESD Protection FEATURES 43 Ultra compact LLP1010-5L package 5 Low package profile < 0.4 mm 4-line ESD protection Low leakage current 12 21483 Low load capacitance C = 0.8 pF D ESD immunity acc. IEC 61000-4-2 21482 15 kV contact discharge 15 kV air discharge MARKING (example only) Pin plating NiPdAu (e4) no whisker growth Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 XY 20932 Dot = pin 1 marking X = date code Y = type code (see table below) click logo to get started DESIGN SUPPORT TOOLS Models Available ORDERING INFORMATION TAPED UNITS PER REEL DEVICE NAME ORDERING CODE MINIMUM ORDER QUANTITY (8 mm TAPE ON 7 REEL) VBUS054DD-HF4 VBUS054DD-HF4-GS08 5000 5000 PACKAGE DATA PACKAGE TYPE MOLDING COMPOUND MOISTURE DEVICE NAME WEIGHT SOLDERING CONDITIONS NAME CODE FLAMMABILITY RATING SENSITIVITY LEVEL MSL level 1 VBUS054DD-HF4 LLP1010-5L C 1.07 mg UL 94 V-0 Peak temperature max. 260 C (according J-STD-020) ABSOLUTE MAXIMUM RATINGS VBUS054DD-HF4 PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT Pin 1, 2, 3 or 4 to pin 5 Peak pulse current I 3A PPM acc. IEC 61000-4-5 t = 8/20 s single shot p Pin 1, 2, 3 or 4 to pin 5 Peak pulse power P 57 W PP acc. IEC 61000-4-5 t = 8/20 s single shot p Contact discharge acc. IEC 61000-4-2 10 pulses 15 kV ESD immunity V ESD Air discharge acc. IEC 61000-4-2 10 pulses 15 kV Operating temperature Junction temperature T -40 to +125 C J Storage temperature T -55 to +150 C STG Rev. 1.8, 04-Jan-2019 Document Number: 81928 1 For technical questions, contact: ESDprotection vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VBUS054DD-HF4 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS VBUS054DD-HF4 (Pin 1, 2, 3, or 4 to pin 5) PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Protection paths Number of lines which can be protected N - - 4 lines channel Reverse stand-off voltage Max. reverse working voltage V -- 5 V RWM Reverse voltage at I = 0.1 A V 5- - V R R Reverse current at V = V = 5 V I - < 0.01 0.1 A IN RWM R Reverse breakdown voltage at I = 1 mA V 6.9 8 8.7 V R BR Reverse clamping voltage at I = 3 A acc. IEC 61000-4-5 V -16 19 V PP C Forward clamping voltage at I = 12 A acc. IEC 61000-4-5 V -3.5 4.5 V F F V = 0 V C -0.8 1 pF IN D Capacitance V = 2.5 V C -0.5 0.8 pF IN D Line symmetry Difference of the line capacitances dC -- 0.05 pF D Note T = 25 C, unless otherwise specified amb TYPICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb 1.0 100 % 8 s to 100 % 0.9 other pins at 0 V 0.8 80 % 0.7 other pins at 3 V 0.6 60 % 0.5 20 s to 50 % other pins at 5 V 0.4 40 % 0.3 20 % 0.2 f = 1 MHz pin 5 connected to ground 0.1 0 % 0 010 20 30 40 012 3 45 21503 20548 Time (s) V at pin 1, 2, 3 or 4 (V) R Fig. 1 - 8/20 s Peak Pulse Current Wave Form Fig. 3 - Typical Capacitance C vs. Reverse Voltage V D R acc. IEC 61000-4-5 100 120 % Pin 5 to pin 1, 2, 3, or 4 Rise time = 0.7 ns to 1 ns 100 % 10 80 % 1 60 % 53 % 0.1 40 % 27 % 0.01 20 % 0.001 0 % 0.5 0.6 0.7 0.8 0.9 1.0 1.1 -10 0 10203040 50607080 90100 21504 V (V) 20557 Time (ns) F Fig. 2 - ESD Discharge Current Wave Form Fig. 4 - Typical Forward Current I vs. Forward Voltage V F F acc. IEC 61000-4-2 (330 /150 pF) Rev. 1.8, 04-Jan-2019 Document Number: 81928 2 For technical questions, contact: ESDprotection vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Discharge Current I ESD I PPM I (mA) C (pF) F D