Virtex UltraScale+ FPGA Data Sheet: DC and AC Switching Characteristics DS923 (v1.19) June 23, 2021 Product Specification Summary The Xilinx Virtex UltraScale+ FPGAs are available in -3, -2, -1 speed grades, with -3E devices having the highest performance. The -2LE devices can operate at a V voltage at 0.85V or 0.72V and provide lower CCINT maximum static power. When operated at V = 0.85V, using -2LE devices, the speed specification for the CCINT L devices is the same as the -2I speed grade. When operated at V = 0.72V, the -2LE performance and static CCINT and dynamic power is reduced. DC and AC characteristics are specified in extended (E), industrial (I), and military (M) temperature ranges. Except the operating temperature range or unless otherwise noted, all the DC and AC electrical parameters are the same for a particular speed grade (that is, the timing characteristics of a -1 speed grade extended device are the same as for a -1 speed grade industrial device). However, only selected speed grades and/or devices are available in each temperature range. The XQ references in this data sheet are specific to the devices available in XQ Ruggedized packages. See the Defense-Grade UltraScale Architecture Data Sheet: Overview (DS895) for further information on XQ Defense- grade part numbers, packages, and ordering information. All supply voltage and junction temperature specifications are representative of worst-case conditions. The parameters included are common to popular designs and typical applications. This data sheet, part of an overall set of documentation on the Virtex UltraScale+ FPGAs, is available on the Xilinx website at www.xilinx.com/documentation . DC Characteristics Absolute Maximum Ratings Table 1: Absolute Maximum Ratings 1 Symbol Description Min Max Units FPGA Logic V Internal supply voltage 0.500 1.000 V CCINT 2 V Internal supply voltage for the I/O banks 0.500 1.000 V CCINT IO V Auxiliary supply voltage 0.500 2.000 V CCAUX Copyright 20162021 Xilinx, Inc. Xilinx, the Xilinx logo, Alveo, Artix, Kintex, Spartan, Versal, Virtex, Vitis, Vivado, Zynq, and other designated brands included herein are trademarks of Xilinx in the United States and other countries. PCI, PCIe, and PCI Express are trademarks of PCI-SIG and used under license. The DisplayPort Icon is a trademark of the Video Electronics Standards Association, registered in the U.S. and other countries. All other trademarks are the property of their respective owners. DS923 (v1.19) June 23, 2021 www.xilinx.com Send Feedback Product Specification 1Virtex UltraScale+ FPGA Data Sheet: DC and AC Switching Characteristics Table 1: Absolute Maximum Ratings (cont d) 1 Symbol Description Min Max Units V Supply voltage for the block RAM memories 0.500 1.000 V CCBRAM V Output drivers supply voltage for HD I/O banks (VU19P and VU23P 0.500 3.400 V CCO only) Output drivers supply voltage for HP I/O banks 0.500 2.000 V 3 V Auxiliary supply voltage for the I/O banks 0.500 2.000 V CCAUX IO V Input reference voltage 0.500 2.000 V REF 4, 5, 6 V I/O input voltage for HD I/O banks (VU19P and VU23P only) 0.550 V + 0.550 V IN CCO I/O input voltage for HP I/O banks 0.550 V + 0.550 V CCO V Key memory battery backup supply 0.500 2.000 V BATT I Available output current at the pad 20 20 mA DC I Available RMS output current at the pad 20 20 mA RMS High Bandwidth Memory (HBM) V Supply voltage for the high-bandwidth memory 0.300 1.500 V CC HBM V I/O supply voltage for the high-bandwidth memory 0.300 1.500 V CC IO HBM V Auxiliary supply voltage for the high-bandwidth memory 0.300 3.000 V CCAUX HBM 7 GTY or GTM Transceiver V Digital supply voltage for select modules in the GTM transceivers 0.500 1.000 V CCINT GT V Analog supply voltage for transceiver circuits 0.500 1.000 V MGTAVCC V Analog supply voltage for transceiver termination circuits 0.500 1.300 V MGTAVTT V Auxiliary analog Quad PLL (QPLL) voltage supply for transceivers 0.500 1.900 V MGTVCCAUX V Transceiver reference clock absolute input voltage 0.500 1.300 V MGTREFCLK V Analog supply voltage for the resistor calibration circuit of the 0.500 1.300 V MGTAVTTRCAL transceiver column V Receiver (RXP/RXN) and transmitter (TXP/TXN) absolute input 0.500 1.200 V IN voltage I DC input current for receiver input pins DC coupled RX 10 mA DCIN-FLOAT 8 termination = floating I DC input current for receiver input pins DC coupled RX 10 mA DCIN-MGTAVTT termination = V MGTAVTT I DC input current for receiver input pins DC coupled RX 0 mA DCIN-GND 9 termination = GND I DC input current for receiver input pins DC coupled RX 0 mA DCIN-PROG 10 termination = programmable I DC output current for transmitter pins DC coupled RX 6 mA DCOUT-FLOAT termination = floating I DC output current for transmitter pins DC coupled RX 6 mA DCOUT-MGTAVTT termination = V MGTAVTT System Monitor V System Monitor supply relative to GNDADC 0.500 2.000 V CCADC V System Monitor reference input relative to GNDADC 0.500 2.000 V REFP 11 Temperature T Storage temperature for XCVU31P, XCVU33P, XCVU35P, XCVU37P, 55 120 C STG 12 XCVU45P, XCVU47P, and XCVU57P Storage temperature (ambient) for all other devices 65 150 C DS923 (v1.19) June 23, 2021 www.xilinx.com Send Feedback Product Specification 2