Please note that Cypress is an Infineon Technologies Company. The document following this cover page is marked as Cypress document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio. Continuity of document content The fact that Infineon offers the following product as part of the Infineon product portfolio does not lead to any changes to this document. Future revisions will occur when appropriate, and any changes will be set out on the document history page. Continuity of ordering part numbers Infineon continues to support existing part numbers. Please continue to use the ordering part numbers listed in the datasheet for ordering. www.infineon.comCY7C1061G/CY7C1061GE 16-Mbit (1M words 16-bit) Static RAM with Error-Correcting Code (ECC) 16-Mbit (1M words 16-bit) Static RAM with Error-Correcting Code (ECC) To access devices with a single chip enable input, assert the chip Features enable (CE) input LOW. To access dual chip enable devices, High speed assert both chip enable inputs CE as LOW and CE as HIGH. 1 2 t = 10 ns/15 ns AA To perform data writes, assert the Write Enable (WE) input LOW, and provide the data and address on the device data pins (I/O Embedded error-correcting code (ECC) for single-bit error 0 1, 2 through I/O ) and address pins (A through A ) respectively. correction 15 0 19 The Byte High Enable (BHE) and Byte Low Enable (BLE) inputs Low active and standby currents control byte writes, and write data on the corresponding I/O lines I = 90 mA typical at 100 MHz CC to the memory location specified. BHE controls I/O through 8 I = 20 mA typical SB2 I/O and BLE controls I/O through I/O . 15 0 7 Operating voltage range: 1.65 V to 2.2 V, 2.2 V to 3.6 V, and To perform data reads, assert the Output Enable (OE) input and 4.5 V to 5.5 V provide the required address on the address lines. Read data is accessible on I/O lines (I/O through I/O ). You can perform 0 15 1.0 V data retention byte accesses by asserting the required byte enable signal (BHE Transistor-transistor logic (TTL) compatible inputs and outputs or BLE) to read either the upper byte or the lower byte of data from the specified address location. Error indication (ERR) pin to indicate 1-bit error detection and correction through I/O ) are placed in a high-impedance state All I/Os (I/O 0 15 when the device is deselected (CE HIGH for a single chip enable Available in Pb-free 48-pin TSOP I, 54-pin TSOP II, and 48-ball HIGH / CE LOW for a dual chip enable device), device and CE 1 2 VFBGA packages or control signals are de-asserted (OE, BLE, BHE). Functional Description On the CY7C1061GE devices, the detection and correction of a single-bit error in the accessed location is indicated by the CY7C1061G and CY7C1061GE are high-performance CMOS assertion of the ERR output (ERR = High). See the Truth Table 1 fast static RAM devices with embedded ECC . Both devices are on page 16 for a complete description of read and write modes. offered in single and dual chip enable options and in multiple pin The logic block diagrams are on page 2. configurations. The CY7C1061GE device includes an ERR pin that signals a single-bit error-detection and correction event The CY7C1061G and CY7C1061GE devices are available in during a read cycle. 48-pin TSOP I, 54-pin TSOP II, and 48-ball VFBGA packages. For a complete list of related documentation, click here. Product Portfolio Current Consumption Features and Options Speed Operating I , (mA) V Range CC CC Product (see Pin Configurations on Range (ns) Standby, I (mA) SB2 (V) f = f page 4) 10/15 max 3 3 Typ Max Typ Max CY7C1061G18 Single or dual chip enables Industrial 1.65 V2.2 V 15 70 80 20 30 CY7C1061G(E)30 2.2 V3.6 V 10 90 110 Optional ERR pins CY7C1061G 4.5 V5.5 V 10 90 110 Address MSB A pin 19 placement options compatible with Cypress and other vendors Notes 1. This device does not support automatic write-back on error detection. 2. SER FIT Rate <0.1 FIT/Mb. Refer AN88889 for details. 3. Typical values are included only for reference and are not guaranteed or tested. Typical values are measured at V = 1.8 V (for a V range of 1.65 V2.2 V), CC CC V =3V (for a V range of 2.2 V3.6 V), and V = 5 V (for a V range of 4.5 V5.5 V), T = 25 C. CC CC CC CC A Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 001-81540 Rev. *T Revised July 13, 2018