Product Technical OrOrdderer Folder Support NowNow InterFET J506-7-8 J506, J507, J508 Current Regulator Diode Features SOT23 Top View InterFET N0016H Geometry Low Noise: 5 nV/Hz Typical Source 1 Low Capacitance: 2pF Typical RoHS Compliant Gate 3 SMT, TH, and Bare Die Package options. Drain 2 Applications Current Regulation Current Limiting TO-92 Bottom View Description Cathode 3 The 50V InterFET J506, J507, and J508 JFETs are targeted for current regulation and limiting applications. The SOT23 package is pinned out as Anode 1 a standard JFET and is required by the user to connect the Gate to the Source or Drain. Product Summary Parameters J506 Min J507 Min J508 Min Unit VOP Peak Operating Voltage 50 50 50 V IF1 Forward Current 1.12 1.44 1.9 mA V Limiting Voltage 1.8 (typ) 2.0 (typ) 2.2 (typ) V L Ordering Information Custom Part and Binning Options Available Part Number Description Case Packaging J506 J507 J508 Through-Hole TO-92-2L Bulk SMPJ506 SMPJ507 SMPJ508 Surface Mount SOT23 Bulk 7 Tape and Reel: Max 3,000 Pieces Minimum 1,000 Pieces SMPJ506TR SMPJ507TR SMPJ508TR 13 Tape and Reel: Max 9,000 Pieces SOT23 Tape and Reel J506COT J507COT J508COT Chip Orientated Tray (COT Waffle Pack) COT 400/Waffle Pack J506CFT J507CFT J508CFT Chip Face-up Tray (CFT Waffle Pack) CFT 400/Waffle Pack Disclaimer: It is the Buyers responsibility for designing, validating and testing the end application under all field use cases and extreme use conditions. Guaranteeing the application meets required standards, regulatory compliance, and all safety and security requirements is the responsibility of the Buyer. These resources are subject to change without notice. IF35324.R00Product Technical OrOrdderer Folder Support NowNow InterFET J506-7-8 Electrical Characteristics Maximum Ratings ( TA = 25C, Unless otherwise specified) Parameters Value Unit VOP Peak Operating Voltage 50 V I Continuous Forward Gate Current 20 mA FG P Continuous Device Power Dissipation 360 mW D P Power Derating 3.27 mW/C T Operating Junction Temperature -55 to 135 C J T Storage Temperature -55 to 135 C STG Static Characteristics ( TA = 25C, Unless otherwise specified) J506 J507 J508 Parameters Conditions Min Typ Max Min Typ Max Min Typ Max Unit IF1 Forward Current VF = 25V 1.12 1.4 1.68 1.44 1.8 2.16 1.9 2.4 2.9 mA VL Limiting Voltage IF = 0.9 IF(MIN) 1.8 2.5 2.0 2.8 2.2 3.1 V Peak Operating VOP IF = 1.1 IF(MAX) 50 50 50 V Voltage Dynamic Characteristics ( TA = 25C, Unless otherwise specified) J506 J507 J508 Parameters Conditions Min Typ Max Min Typ Max Min Typ Max Unit Zfi Dynamic Impedance VF = 25V, f = 1kHz 0.33 1.4 0.2 1.0 0.2 0.7 M Anode-Cathode CF VF = 25V, f = 1kHz 2 2 2 pF Capacitance J506-7-8 2 of 4 InterFET Corporation Document Number: IF35324.R00 www.InterFET.com June, 2019