PHDMI2F4X Nexperia

PHDMI2F4 ESD protection for ultra high-speed interfaces Rev. 1 31 July 2014 Product data sheet 1. Product profile 1.1 General description The device is designed to protect high-speed interfaces such as Transition Minimized Differential Signaling (TDMS) lines of High-Definition Multimedia Interface (HDMI), standard 2.0 and lower, against ElectroStatic Discharge (ESD). The device includes four high-level ESD protection diode structures for ultra high-speed signal lines and is encapsulated in a leadless small DFN2510A-10 (SOT1176-1) plastic package. All signal lines are protected by a special diode configuration offering ultra low line capacitance of only 0.5 pF. These diodes utilize a unique snap-back structure in order to provide protection to downstream components from ESD voltages up to 10 kV contact exceeding IEC 61000-4-2, level 4. 1.2 Features and benefits System ESD protection for HDMI, standard 2.0 and lower. All signal lines with integrated rail-to-rail clamping diodes for downstream ESD protection of 10 kV exceeding IEC 61000-4-2, level 4 Matched 0.5 mm trace spacing Signal lines with 0.05 pF matching capacitance between signal pairs Line capacitance of only 0.5 pF for each channel Design-friendly pass-through signal routing 1.3 Applications The device is designed for high-speed receiver and transmitter port protection: TVs and monitors DVD recorders and players Notebooks, main board graphic cards and ports Set-top boxes and game consolesPHDMI2F4 Nexperia ESD protection for ultra high-speed interfaces 2. Pinning information Table 1. Pinning Pin Symbol Description Simplified outline Graphic symbol 1 CH1 channel 1 ESD protection 10 9876 124 5 2 CH2 channel 2 ESD protection 3 GND ground 4 CH3 channel 3 ESD protection 12345 Transparent top view 5 CH4 channel 4 ESD protection 6 n.c. not connected 3, 8 018aaa001 7 n.c. not connected 8 GND ground 9 n.c. not connected 10 n.c. not connected 3. Ordering information Table 2. Ordering information Type number Package Name Description Version PHDMI2F4 DFN2510A-10 plastic extremely thin small outline package SOT1176-1 no leads 10 terminals body 1 2.5 0.5 mm 4. Marking Table 3. Marking codes Type number Marking code PHDMI2F4 96 5. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit V input voltage 0.5 +5.5 V I 1 V electrostatic discharge IEC 61000-4-2, level 4 ESD voltage contact discharge 10 +10 kV air discharge 15 +15 kV T ambient temperature 40 +85 C amb T storage temperature 55 +125 C stg 1 All pins to ground. PHDMI2F4 All information provided in this document is subject to legal disclaimers. Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 1 31 July 2014 2 of 14