Thyristors Surface Mount 400V - 800V > MAC12SM, MAC12SN Pb MAC12SM, MAC12SN Description Designed for industrial and consumer applications for full wave control of AC loads such as appliance controls, heater controls, motor controls, and other power switching applications. Features Uniform Gate Trigger High Surge Current Currents in Three Capability 100 Amperes Quadrants, Q1, Q2, and Industry Standard TO- Q3 220AB Package for Ease High Commutating di/dt of Design and High Immunity to Glass Passivated dv/dt 125C Junctions for Reliability and Uniformity Minimizes Snubber Networks for Protection These Devices are PbFree and are RoHS Blocking Voltage to 800 Compliant Volts On-State Current Rating of 12 Amperes RMS at 80C Pin Out Functional Diagram MT 2 MT 1 G CASE 221A STYLE 4 1 Additional Information 2 Samples Datasheet Resources 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/27/19Thyristors Surface Mount 400V - 800V > MAC12SM, MAC12SN Maximum Ratings (T = 25C unless otherwise noted) J Rating Symbol Value Unit Peak Repetitive Off-State Voltage (Note 1) MAC12HCDG V , 400 DRM V (Gate Open, Sine Wave 50 to 60 Hz, T = -25 to 100C) MAC12HCMG V 600 J RRM On-State RMS Current (Full Cycle Sine Wave, 60 Hz, T = 70C) I 12 A C T (RMS) Peak Non-Repetitive Surge Current I 90 A TSM (One Full Cycle Sine Wave, 60 Hz, T = 125C) C 2 Circuit Fusing Consideration (t = 8.3 ms) I t 33 Asec Peak Gate Power (Pulse Width 1.0 s, T = 80C) P 16 W C GM Average Gate Power (t = 8.3 ms, T = 80C) P 0.35 W C G(AV) Operating Junction Temperature Range T -40 to +110 C J Storage Temperature Range T -40 to +150 C stg Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. V and V for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage however, positive gate voltage shall not be applied concurrent with negative DRM RRM potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. Thermal Characteristics Rating Symbol Value Unit JunctiontoCase (AC) R 2.2 JC Thermal Resistance, C/W JunctiontoAmbient R 62.5 JA Maximum Lead Temperature for Soldering Purposes, 1/8 from case for T 260 C L 10 seconds Electrical Characteristics - OFF (T = 25C unless otherwise noted Electricals apply in both directions) J Characteristic Symbol Min Typ Max Unit - - 0.01 Peak Repetitive Blocking Current T = 25C I , J DRM mA (V = V = V Gate Open) T = 125C I D DRM RRM J RRM - - 2.0 Electrical Characteristics - ON (T = 25C unless otherwise noted Electricals apply in both directions) J Characteristic Symbol Min Typ Max Unit Peak OnState Voltage (Note 2) (I = 11 A) V - 1.2 1.85 V TM TM MT2(+), G(+) - 13 5.0 Gate Trigger Current (Continuous dc) MT2(+), G() I - 13 5.0 mA GT (V = 12 V, R = 100 ) D L MT2(), G() - 13 5.0 Holding Current (V = 12 V, Gate Open, Initiating Current = 150 mA)) I - 30 10 mA D H MT2(+), G(+) - 20 15 Latching Current MT2(+), G() I - 30 20 mA L (V = 24 V, I = 50 mA) D G MT2(), G() - 20 15 MT2(+), G(+) 0.45 0.68 1.5 Gate Trigger Voltage MT2(+), G() V 0.45 0.62 1.5 V GT (V = 12 V, R = 100 ) D L MT2(), G() 0.45 0.67 1.5 Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. Indicates Pulse Test: Pulse Width 2.0 ms, Duty Cycle 2%. 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/27/19