Thyristors Datasheet MAC8DG, MAC8MG, MAC8NG Surface Mount 400V -800V RoHS Pb Description Designed for high performance fullwave ac control applications where high noise immunity and high commutating di/dt are required. The MAC8xG series is designed for high performance full-wave AC control applications where high noise immunity and high commutating di/dt are required. Features Blocking Voltage to 800 Volts Industry Standard TO220 Package OnState Current Rating of 8.0 Amperes RMS at 100C High Commutating di/dt 6.5 A/ms minimum at 125C Uniform Gate Trigger Currents in Three Quadrants These Devices are PbFree and are RoHS Compliant High Immunity to dv/dt 250 V/s minimum at 125C Minimizes Snubber Networks for Protection Additional Information Functional Diagram MT 2 MT 1 G Pin Out Resources Accessories Samples CASE 221A STYLE 4 1 2 2021 Littelfuse, Inc. 1 Specifications are subject to change without notice. Revised: GD. 02/19/21Thyristors Datasheet MAC8DG, MAC8MG, MAC8NG Surface Mount 400V -800V Maximum Ratings (TJ = 25C unless otherwise noted) Rating Symbol Value Unit MAC8DG 400 Peak Repetitive Off-State Voltage (Note 1) V , DRM MAC8MG 600 V (Gate Open, Sine Wave 50 to 60 Hz, T = -40 to 125C) V J RRM MAC8NG 800 On-State RMS Current (Full Cycle Sine Wave, 60 Hz, T = 100C) I 8.0 A C T (RMS) Peak Non-Repetitive Surge Current I 80 A TSM (One Full Cycle Sine Wave, 60 Hz, T = 125C) C 2 Circuit Fusing Consideration (t = 8.3 ms) I t 26 Asec Peak Gate Power (Pulse Width 1.0 s, T = 80C) P 16 W C GM Average Gate Power (t=8.3ms, T = 80C) P 0.35 W J G(AV) Operating Junction Temperature Range T -40 to +125 C J Storage Temperature Range T -40 to +150 C stg Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. V and V for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages DRM RRM shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. Thermal Characteristics Rating Symbol Value Unit JunctiontoCase (AC) R 2.2 JC Thermal Resistance, C/W JunctiontoAmbient R 62.5 JA Maximum Lead Temperature for Soldering Purposes, 1/8 from case for 10 seconds T 260 C L Electrical Characteristics - OFF (TJ = 25C unless otherwise noted Electricals apply in both directions) Characteristic Symbol Min Typ Max Unit - - 0.01 Peak Repetitive Blocking Current T = 25C I , J DRM mA (V = V = V Gate Open) T = 125C I - - 2.0 D DRM RRM J RRM Electrical Characteristics - ON (TJ = 25C unless otherwise noted Electricals apply in both directions) Characteristic Symbol Min Typ Max Unit Peak OnState Voltage (Note 4) (I = 6.0 A) V 1.3 1.6 V TM TM MT2(+), G(+) 5.0 13 35.0 Gate Trigger Current (Continuous dc) MT2(+), G() I 5.0 16 35.0 mA GT (V = 12 V, R = 100 ) D L MT2(), G() 5.0 18 35.0 Holding Current (V = 12 V, Gate Open, Initiating Current = 150 mA)) I 20 40 mA D H MT2(+), G(+) 20 50 Latching Current MT2(+), G() I 30 80 mA L (V = 24 V, I = 35 mA) D G MT2(), G() 20 50 MT2(+), G(+) 0.5 0.69 1.5 Gate Trigger Voltage MT2(+), G() V 0.5 0.77 1.5 V GT (V = 12 V, R = 100 ) D L MT2(), G() 0.5 0.72 1.5 MT2(+), G(+) 0.2 Gate NonTrigger Voltage (T = 125C) MT2(+), G() V 0.2 V J GD (V = 12 V, R = 100 ) D L MT2(), G() 0.2 2. Indicates Pulse Test: Pulse Width 2.0 ms, Duty Cycle 2%. 2021 Littelfuse, Inc. 2 Specifications are subject to change without notice. Revised: GD. 02/19/21